[Equest-users] New LEED Table 1.4 form

[Ingeniera Paula Andrea Hernández]

Hi,

 

Can any of you tell me were may I insert Baseline VAV PFP boxes data?, I
received a review that this data is missing in the TAble 1.4, but can´t find
were to insert it,

 

thank you,

 

Paula

 

 

Ingeniera Paula Andrea Hernández LEED  AP (BD +C)

Capitulo Argentino de ASHRAE Board Member -  Student Activities CC

 

Estudio Ingeniero Mario Pedro Hernández

Tel./Fax: 4302-9561 Tel.: 4303-3481

Av. Montes de Oca 1103 5º D - C.A.B.A.

Web Site:  <http://www.mphingenieria.com.ar/> www.mphingenieria.com.ar

e-mail:  <mailto:mphingenieria at fibertel.com.ar>
paulahernandez4 at fibertel.com.ar

 

De: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] En nombre de Pasha
Korber-Gonzalez
Enviado el: martes, 26 de marzo de 2013 3:04
Para: eQUEST Users List
Asunto: [Equest-users] New LEED Table 1.4 form

 

Hi all---I'm using the new LEED Table 1.4 form/file for the first time and
for some reason the "check boxes" are disabled and I'm not allowed to make
selections for my input.   It seems that some "form" command is not turned
on and the file is in a "format" mode instead.

 

Can any of you guide me as to how to turn these Form controls on so that I
can actually select the check boxes I need too?    I just downloaded this
from LEED online today and when I opened it to start my inputs I was not
able to make the check box selections.

 

I already enabled the macros in Excel, but I don't think this caused the
checkbox inputs to be disabled.

 

Thanks for any info you can offer!

 

Pasha

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130617/eb1c0ab5/attachment.htm>