[Equest-users] Equest - Simulation Report BEPS

[John Aulbach]

Yes, please post your files, Ginnie. Otherwise, all is speculation.
 
John R. Aulbach, PE


________________________________
From: Ginnie Schofield <GSchofield at edaengineering.com>
To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org> 
Sent: Monday, June 3, 2013 9:08 AM
Subject: [Equest-users] Equest - Simulation Report BEPS



Equest Users:
 
I am modeling a school building, and on this BEPS report for baseline run and parametric runs,
the Total Source Energy KBTU/SQFT-YR 
Gross-Area and Net-Area number is higher than expected.  
Actually, I would expect it to be quite a bit lower in the 0.75 range.
 
Anyone have some approach I could follow to verify these and what could be driving this
elevated number.   I could post INP and PD2 files if necessary.
 
Any and all suggestions are sincerely appreciated, and thank you in advance.
 
GINNIE SCHOFIELD
ENGINEERING DESIGN ASSOCIATES
1607 CY Ave, Ste 303, Casper, WY 82604
(Ph) 307-266-5033   (Fx) 307-234-3805
 
 
 
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130603/c945d347/attachment-0002.htm>