[Equest-users] Aligning shells over each other

[bfountain at greensim.com]

On screen 1 of the shell wizard, select the "specify exact coordinates" and set x & y to 0 for all shells.

Otherwise eQUEST tries to centre the shells for you.
Brian Fountain
bfountain at greensim.com

-----Original Message-----
From: Omar Katanani <omar at ecoconsulting.net>
Sender: equest-users-bounces at lists.onebuilding.orgDate: Tue, 14 May 2013 15:57:02 
To: equest-users at lists.onebuilding.org<equest-users at lists.onebuilding.org>
Subject: [Equest-users] Aligning shells over each other

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG