[Equest-users] How to delete a floor in eQuest model in detail design mode.

[Ankit.Anil.Gupta at jci.com]

Thanks Mayank.... and thanks to all eQuest users for contributing there 
effort, time and knowledge for this query.

Issue has been resolved ..

Thanks
Ankit Gupta(LEED GA, IGBC AP)
 
 



From:   Mayank Bhatnagar <mayank.23aug at gmail.com>
To:     Ankit.Anil.Gupta at jci.com
Cc:     equest-users at lists.onebuilding.org
Date:   05/21/2013 10:08 AM
Subject:        Re: [Equest-users] How to delete a floor in eQuest model 
in detail design mode.



Hello Ankit,

I am little bit confuse of your question; Either it will be in detail data 
mode or wizard data mode (you write "detail design wizard mode"). 
As my knowledge, If you are in wizard mode you can easily change the 
multiplier number in the screen 1 of DD wizard: Shell component.

If you are in detailed mode, when you go at spreadsheet tab of Building 
shell, internal load, and air-side tab, you will get columns for space 
multiplier and floor multiplier. By changing these number you can get 
desire floors.  

If someone has other way to do it, please share with us.


Regards,

Mayank Bhatnagar
Energy Analyst

On Mon, May 20, 2013 at 7:06 PM, <Ankit.Anil.Gupta at jci.com> wrote:
Hi, 

I have build a model for LEED compliance using a multiplier option in 
eQuest, now by mistake my multiplier went wrong resulting in one excess 
floor in each wing of building. 

So can anyone guide me to delete a floor eQuest model in detail design 
wizard mode. 


Thanks 
Ankit 
 

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to 
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130521/aa542dc9/attachment-0002.htm>