[Equest-users] Is there a way to extract specific data from sim result?

[Yf Sun]

Hi, tiejun!
Thanks for your reply but I dont need the hourly data, i need annual system
peak loads, cooling and heating system loads for example, do you have a
idea how to automate the data extraction?


On Wed, May 22, 2013 at 10:05 AM, Yf Sun <caselysun at gmail.com> wrote:

> Hi, tiejun!
> Thanks for your reply but I dont need the hourly data, i need annual
> system peak loads, cooling and heating system loads for example, do you
> have a idea how to automate the data extraction?
>
>
> On Wed, May 22, 2013 at 9:51 AM, tiejun hu <hutiejun1223 at 126.com> wrote:
>
>> Hi,Yf
>>     You can creat hourly reports in detail mode, then run it, open hourly
>> reports in sim file.
>>     Best regards
>>
>>
>>
>>
>>
>> At 2013-05-22 09:48:23,"Yf Sun" <caselysun at gmail.com> wrote:
>>
>> Hi,dear Equesters!
>> Im currently doing my ph.d research using equest to analyse building
>> energy performance, i found its time consuming to find the data i need from
>> sim result, as the data i need almost the same for every simulation, do you
>> know a way to extract the specific text data(for importing to excel)
>> quickly by using some third party program maybe?
>>
>> --
>>  Best regards
>> Ivan
>>
>>
>>
>>
>
>
> --
> Best regards
> 孙一峰
>



-- 
Best regards
孙一峰
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130522/ae55063c/attachment-0002.htm>