[Equest-users] Cooling coil leaving temp error

Sami, Vikram vikram.sami at zgf.com
Tue Nov 5 13:01:41 PST 2013


I'm running a simulation where I get the following error:


In EL1 Sys1 (VAVS) (G)             , cooling coil leaving temperature must

             be at least 6F higher than entering water temp.




I checked my temps - the entering water temp is 44 degrees, and the coil leaving temp is 55. I have a 5 degree delta T on the fan - could that be causing this?

Vikram Sami
BEMP, LEED BD+C
Associate Partner



ZGF ARCHITECTS LLP
T 206.521.3509 E vikram.sami at zgf.com
925 Fourth Avenue, Suite 2400
Seattle, WA 98104





________________________________
The contents of this email and any attachments to it contain confidential and/or legally privileged information from Zimmer Gunsul Frasca Architects LLP or its affiliates. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, be aware that any disclosure, copying, distribution, or use of the information contained herein is strictly prohibited. If you received this transmission in error, please contact the sender and destroy the material in its entirety, whether in electronic or hard copy format.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20131105/71c2ae49/attachment.htm>


More information about the Equest-users mailing list