[Equest-users] evaporative cooling

[Sambhav Tiwari]

Dear All,
               I am modeling a building with evaporative cooling in some
spaces the issue is the the zones under evaporative cooling have to
assigned with cooling design and set point temperature
 what value should be taken for that 75F seems unlike.

I tried with my logic of near to 88F because it can cool up to 5F above
wetbulb and wetbulb is 83F for monsoon. but the issue is that fan energy
consumption is coming extremely low near to 15355kwh  byteking design and
setpoint temp 88F and when i entered 75F it is coming 350000kwh

Can any one give me some suggestion.

Regards
Sambhav
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130906/ff2951a7/attachment.htm>