[Equest-users] Exterior Windows misplaced

[Nikola Kravik]

Welcome to our  group Ryan :)!
Pretty impressive, first model, dwg file, custom windows-you are ahead of the game....

There can be many reasons why you're having issues.
What we typically do in a request like yours is to ask you to attach/zip your pd2., inp and bdl file and send it to the users list-much easier to troubleshoot.

Best, Nikola

Nikola Kravik, BEMP, LEED AP

ASHRAE Golden Gate Chapter Membership Promotion Chair
IBPSA USA San Francisco Chapter Committee
Project Engineer

Willdan Energy Solutions
6120 Stoneridge Mall Road, Suite 250
Pleasanton, CA 94588
T. 925.416.4200 ext. 1228
D. 925.416.4228
C. 925.719.5883
F. 925.737.0174
nkravik at willdan.com<mailto:nkravik at willdan.com>
www.willdan.com/energy<http://www.willdan.com/energy>

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Ryan Black
Sent: Tuesday, September 10, 2013 9:43 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Exterior Windows misplaced

I am very new to eQuest and am working on completing my very first model. I imported a .dwg file to set up the building footprint and zones and have begun on exterior elevations. I have been inputting my exterior glazing using the "Custom Window/Door Placement..." option in the DD Wizard. I have all the windows input correctly, but when I back out and go to the 3-D view of the building, some of the windows are on the wrong walls, and some I am not seeing at all (unless they are 'doubling up' on one of the other walls). I am not sure if I have made an error in the earlier stages of constructing the model thus far, or if this is some type of glitch. Does this sound familiar to anyone? Any advice?
I have seen that I can go in and change the parent wall for the misplaced windows in the detailed edit mode, but would just like to figure this out for future models going forward.
Thanks!
Ryan


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130910/2aea2f19/attachment-0002.htm>