[Equest-users] Modeling a Gas engine generator in eQuest

[Michael Hsueh]

Hi Ginnie,

If you're in the detailed edit mode, you can add an electric generator in
the "Utility & Economics" section:

[image: Inline image 1]

>From there you can specify the type of generator as well as parameters for
heat recovery.

Hope this helps!

*Michael Hsueh *| Project Engineer**

*Integral Group *| 427 13th Street | Oakland CA USA 94612
*T* 510.663.2070 ext 241

integralgroup.com <http://www.integralgroup.com/> | *
mhsueh at integralgroup.com*****

*
*

*Trust* | *Nurture** *| *Inspire*

Please consider the environment before printing this email.



On Wed, Sep 11, 2013 at 6:45 AM, Ginnie Schofield <
GSchofield at edaengineering.com> wrote:

>  eQuest Users:****
>
> ** **
>
> Looking for some information on how to model. . . . . ****
>
>  An Owner wants to install a gas engine generator in the physical plant
> and recover the heat generated from the generator while operating.****
>
> ** **
>
> Wondering how to model this in eQuest. . . . ****
>
> ** **
>
> Any ideas?****
>
> ** **
>
> *G**INNIE **S**CHOFIELD***
>
> *E**NGINEERING **D**ESIGN **A**SSOCIATES*
>
> ** **
>
> ** **
>
> ** **
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130911/7003c500/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 150758 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130911/7003c500/attachment-0002.jpeg>