[Equest-users] Relative Humdity

[Joe Huang]

Do you mean the relative humidity on the weather file?

That would require changing the weather file, but that's not a task for the timid because:
1) the weather file is in a binary format that you can't read, so you'd have to convert it 
to ASCII, make the changes, and convert that back.  There are Fortran programs for doing 
that, though.
2) RH is a derived value that's not in the weather file. You would have to change several 
weather elements and make sure that they're all consistent - absolute humidity, wet bulb, 
and enthalpy.

Joe

Joe Huang
White Box Technologies, Inc.
346 Rheem Blvd., Suite 108D
Moraga CA 94556
yjhuang at whiteboxtechnologies.com
http://weather.whiteboxtechnologies.com for simulation-ready weather data
(o) (925)388-0265
(c) (510)928-2683
"building energy simulations at your fingertips"


On 4/9/2014 12:29 PM, Fakeha Sehar wrote:
> How can relative humidity be changed in eQuest?
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140409/d6b0761f/attachment-0002.htm>