[Equest-users] Single Slope Roofs

John Aulbach jra_sac at yahoo.com
Fri Apr 25 11:26:28 PDT 2014


Nadar:
 
Can you create your building in the Wizard, then switch to detailed edit mode and change your roof slope and wall configurations there? I have done so in the past.
 
John R. Aulbach, PE


________________________________
From: "Chalfoun, Nader V - (chalfoun)" <chalfoun at email.arizona.edu>
To: Equest Users <equest-users at onebuilding.org> 
Sent: Friday, April 25, 2014 11:09 AM
Subject: [Equest-users] Single Slope Roofs



Is there any updates yet to allow single slope roof modeling in eQUEST 3.65?
 
Nader
 --------------------------------------------
Nader V. Chalfoun, Ph.D., LEED© AP, CEA
Professor of Architecture and Environmental Sciences
Director: The House Energy Doctor Program http://capla.arizona.edu/hed/ https://www.facebook.com/houseenrgydoctor
Chair: Master of Science in Architecture Program
Coordinator: Environmental Education Ph.D. Minor
Faculty: Global Change Ph.D. Minor
Address:  University of Arizona
               College of Architecture, Planning, and Landscape Architecture
               1040 N. Olive St., Tucson, AZ 85721, U.S.A.
               Phone: (520)621-6751    Fax: (520)621-8700
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140425/3c3e59fe/attachment-0002.htm>


More information about the Equest-users mailing list