[Equest-users] sloped atrium glass

[John Aulbach]

Hi Mark:

I don't think sloped glass is what you want to do in the Wizards. The glazing usually stayed in the wall plane, and tilted walls required geometric calisthenics in the Detail Edit mode.

John R. Aulbach, PE


On Wednesday, August 6, 2014 1:34 PM, "Mark at nationalglazingsolutions.com" <Mark at nationalglazingsolutions.com> wrote:
 


 
Can someone explain how sloped roof and atrium glass is created in SD/DD Wizard?
Thanks
Mark
 
 
 
Mark A. Carlson, CEM |Engineering Manager, Energy Solutions
Direct: 404.580-4639  |  Toll Free: 866.925.2083 x 808
Fax: 866.966.4256   |   Mark at NationalGlazingSolutions.com 
NATIONAL GLASS FILMS & PRINTED GRAPHIC FILM SERVICES 
WWW.NATIONALGLAZINGSOLUTIONS.COM   
National Glazing Solutions was recognized as being the #1 commercial film dealer in the USA (window film mag sept 2013)
Click here < Tri-Shield Video>to witness the latest proprietary smash & grab protection system exclusively from NGS
   
 
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140806/d7c9e530/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2561 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140806/d7c9e530/attachment.jpg>