[Equest-users] Error: Exterior wall has negative net area

[John Aulbach]

Sir:
Please include your .INP and .PD2, as your description of you problem is unclear to me.
Thanks.
John Aulbach, PE 

     On Monday, December 1, 2014 9:35 PM, glenn noronha <glenn_nha at yahoo.co.in> wrote:
   

 Hi
I have created a two storey model. I created a separate shell for each floor as the floor area of each is not identical. Now certain areas on the first floor are open to below to the ground floor. While running the simulation the errors saying that certain exterior walls are having negative net area. On checking the wall location, it was found that all the areas which i had put as open to below are having these exterior walls.Please advice me on how to resolve this issue also want to know if my approach to a multi storey project by creating different shell areas was the right move.
Thank YouGlenn Noronha
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20141202/d0eef7ce/attachment.htm>