[Equest-users] Changing air source for air-to-air heat pump
Greenberg, Ari
agreenberg at CANNONDESIGN.COM
Mon Dec 8 12:58:59 PST 2014
Hello all,
Does anyone know of a method to model an air-source heat pump that uses the air handler exhaust stream rather than ambient air? The intent here would be to model an energy recovery that uses a heat pump (rather than a traditional HX) for energy recovery between the exhaust and supply streams. This is a lab building in climate zone 6 (central Vermont).
Any suggestions for workarounds or approximations are appreciated.
Thanks,
Ari
Ari Greenberg, LEED AP BD+C
[cid:image001.png at 01D012FE.FA01F5D0]
100 Cambridge St., Suite 1400
Boston, Massachusetts 02114
T 617.517.6224 * M 857.231.1076
cannondesign.com
[cid:image002.gif at 01D012FE.FA01F5D0]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20141208/1afdfbb0/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 6945 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20141208/1afdfbb0/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.gif
Type: image/gif
Size: 566 bytes
Desc: image002.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20141208/1afdfbb0/attachment-0001.gif>
More information about the Equest-users
mailing list