[Equest-users] No heating/cooling equipment has been defined

PKConsulting pasha.pkconsulting at gmail.com
Sat Feb 1 12:27:23 PST 2014


The best way for any of us to assist you is to look at and troubleshoot your model file,  is to attach the .pd2, .inp, and your weather file if it is unique.

If you can send these through,  I would be happy to look at your model and give you some ideas to fix the problem.

Ph: 308-763-1593

> On Feb 1, 2014, at 3:06 AM, elenisoulti at co2engineering.eu wrote:
> Dear all,
> I am using eQUEST for a LEED project. After the review, I need to change the HVAC System from 6 (Packaged VAV with PFP boxes) to 5 (Packaged VAV with reheat) in the baseline model.
> I made the changes as I thought necessary, and although when I open the model it gives me no errors (and there are no errors in the "error listing"), when I simulate it says that it cannot complete the simulation due to errors. In the BDL file, I see "no heating equipment has been defined" or "no cooling equipment has been defined".
> Do you have any idea why this might be happening? I would appreciate any suggestions on how to fix this. I'm happy to provide the INP file or give additional information if that helps.
> Thank you very much in advance.
> Kind regards,
> Eleni
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

More information about the Equest-users mailing list