[Equest-users] space renaming
jhaberl at tamu.edu
Mon Jul 28 06:09:16 PDT 2014
One question you might ask is why you have 476 spaces in EQUEST?
Normally, a space is needed only if that zone has a unique load, usage, external exposure or HVAC system. Otherwise, it is more common to use a simplified zoning. For example, 5 zones are normally used for a rectangular building of more than 50 ft in depth. At most, for a multistory building, three floors can be used, one for the top floor, one for the middle floors, and one for the ground floor.
Hence, you might consider reducing the number of zones before proceeding.
Jeff S. Haberl, Ph.D., P.E.inactive, FASHRAE, FIBPSA
Department of Architecture
Texas A&M University
College Station, Texas 77845-3581
Office: 979-845-6507, Lab: 979-845-6065
Fax: 970-862-2457, jhaberl at tamu.edu<mailto:jhaberl at tamu.edu>, www.esl.tamu.edu<http://www.esl.tamu.edu>
On Jul 26, 2014, at 3:19 PM, "wafik adbelkarim" <abdelkarim.wafik at gmail.com<mailto:abdelkarim.wafik at gmail.com>> wrote:
good day every body,
what is the fastest and easiest way to rename about 476 space in eQUEST model.
instead of going one by one then doing the same for the thermal zones!
whats the best way to name both using the wizard without having any errors?
is there is any shortcuts?
Equest-users mailing list
To unsubscribe from this mailing list send a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Equest-users