[Equest-users] error for equest run,
boning liu
boning.liu at gmail.com
Thu Jul 31 13:20:49 PDT 2014
Hello, all, I am a newbie using equest. I have an error for running
equest. I am right now doing system 7 baseline for a 20 floor building.
Based on the Asharea manual, it needs to have Primary-Secondary chilled
water loop. I assigned one pump for each cooler on the primary loop, and
the secondary loop is attached to the primary loop, with a secondary pump.
However, before I tried to assigned one of the coils to the secondary loop,
I keep on getting error for Sec CHW Pump has zero design flow. After I
tried to assign one of the coils to the secondary loop,. I am getting the
following error:
Pump: Sec CHW Pump has zero design flow. If attached to
a DHW loop, make sure the recirculation flow is
nonzero.
Anyone can give me some hint? I attached the screenshot for my water side
system.
Thank you so much!
Boning Liu, PhD, EIT, LEED AP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140731/4d7d2ebe/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: print screen.png
Type: image/png
Size: 37027 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140731/4d7d2ebe/attachment.png>
More information about the Equest-users
mailing list