[Equest-users] Issue with drawings zones in wizard

[Michael Campbell]

I just opened this same project in v3.65 and all of the zones are showing
up.  Thanks for the advice.



*Mike Campbell, E.I.T., LEED AP O+M*
*Sustainability Specialist*
*Sustainable Solutions Corporation*
Office: 610-569-1047

Mobile: 609-923-1743 <http://610-569-1047/>
www.SustainableSolutionsCorporation.com<http://www.sustainablesolutionscorporation.com/>
*Sustainable Solutions Corporation is WBENC and BCorp Certified.*

*This email message and any attachments are for the sole use of the
intended recipient(s) and may contain confidential and privileged
information. Any unauthorized review, use, disclosure or distribution is
prohibited. If you are not the intended recipient, please contact the
sender by reply email and destroy all copies of the original message and
any attachments.*



*From:* David C. Fishel [mailto:David_Fishel at rlfae.com]
*Sent:* Tuesday, May 06, 2014 9:01 AM
*To:* Michael Campbell; equest-users at lists.onebuilding.org
*Subject:* RE: [Equest-users] Issue with drawings zones in wizard



If you are still using Equest 3.64 it has a limit on size and this may be
your problem.  The limits were expanded in the latest version 3.65.



You can combine similar zones without a loss of accuracy and simplify your
model.



Hope this helps



*-David*



*David C. Fishel, PE*

*Senior Energy Analyst*



*RLF |* architecture engineering interiors

4750 New Broad Street, Orlando, FL 32814

p 407.730-8600 | f 407.730-3603| www.rlfarchitects.com



*P* *Please consider the environment before printing this e-mail*





*From:* equest-users-bounces at lists.onebuilding.org [
mailto:equest-users-bounces at lists.onebuilding.org<equest-users-bounces at lists.onebuilding.org>]
*On Behalf Of *Michael Campbell
*Sent:* Tuesday, May 06, 2014 8:54 AM
*To:* equest-users at lists.onebuilding.org
*Subject:* [Equest-users] Issue with drawings zones in wizard



So I have a new project in which I have completed drawing the first floor
outline and zones.  See below image showing the completed floor plan.





However, when I go to the detailed mode, many of these zones are not
defined.  It looks like they just do not exist.  See below image.





Has anyone encountered this issue before?  I’ve tried re-drawing the zones
and nothing seems to be working.



*Mike Campbell, E.I.T., LEED AP O+M*
*Sustainability Specialist*
*Sustainable Solutions Corporation*
Office: 610-569-1047

Mobile: 609-923-1743 <http://610-569-1047/>
www.SustainableSolutionsCorporation.com<http://www.sustainablesolutionscorporation.com/>
*Sustainable Solutions Corporation is WBENC and BCorp Certified.*

*This email message and any attachments are for the sole use of the
intended recipient(s) and may contain confidential and privileged
information. Any unauthorized review, use, disclosure or distribution is
prohibited. If you are not the intended recipient, please contact the
sender by reply email and destroy all copies of the original message and
any attachments.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140506/537c931c/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 129768 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140506/537c931c/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 97611 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140506/537c931c/attachment-0005.jpg>