[Equest-users] Single Pane Low E Glass
jra_sac at yahoo.com
Mon May 12 09:10:58 PDT 2014
I would do as you say, but rename the glass to another name so it doesnt change a Library component in the Glass Library.
John R aulbach PE
From: Mark at nationalglazingsolutions.com <Mark at nationalglazingsolutions.com>
To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
Date: Monday, May 12, 2014 4:00:04 PM GMT+0000
Subject: [Equest-users] Single Pane Low E Glass
Good morning, although uncommon there are single pane Low E coated windows out there - the coating is fragile and often damaged but they do exist. Is there any way to model emissivity on single pane glass?
What if I choose double pane, add the lower emissivity, then input U-factor and SHGC for the single pane unit (attached screenshot)? Will eQuest grab the emissivity range (which I want) but the Ufactor and SHGC for single pane which I entered manually?
Mark A. Carlson, CEM | Engineering Manager, Energy Solutions
Direct: 404.580-4639 | Toll Free: 866.925.2083 x 808
Fax: 866.966.4256 | Mark at NationalGlazingSolutions.com<mailto:Mark at NationalGlazingSolutions.com>
NATIONAL GLASS FILMS & PRINTED GRAPHIC FILM SERVICES
National Glazing Solutions was recognized as being the #1 commercial film dealer in the USA (window film mag sept 2013)<http://www.nationalglazingsolutions.com/2013/10/30/n-g-s-named-1-commercial-film-dealer-in-u-s-a/>
Click here < Tri-Shield Video><http://youtu.be/MOCzzBINFY8> to witness the latest proprietary smash & grab protection system exclusively from NGS
Equest-users mailing list
To unsubscribe from this mailing list send a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
More information about the Equest-users