[Equest-users] Compliance Analysis?
Jennifer Crawford
jcrawford at crawfordandassociates.com
Wed May 28 11:56:45 PDT 2014
Hi all,
I am trying to conduct my very first "compliance analysis", but of course I'm getting errors. The errors are attached. I am using the design wizard to make my proposed building. As a sanity check, I even started fresh and used all the reference inputs in the design wizard and got the same errors. I'm using v3.65 build 7163. Is there a known problem with using the design wizard to do this? What could be going wrong? Thanks!
Regards,
Jennifer Crawford
Staff Engineer
Crawford & Associates Engineering, PC
Engineering Consultants, Land Surveyors, Planners, Geologists
551 Warren Street
Hudson, New York 12534
Phone: (518) 828-2700 ext. 128
Fax: (518) 828-2723
www.crawfordandassociates.com<http://www.crawfordandassociates.com/>
P Please consider the environment before printing this email
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140528/e3925fa9/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Compliance Error Message.png
Type: image/png
Size: 52493 bytes
Desc: Compliance Error Message.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140528/e3925fa9/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Test.zip
Type: application/x-zip-compressed
Size: 1822286 bytes
Desc: Test.zip
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140528/e3925fa9/attachment.bin>
More information about the Equest-users
mailing list