[Equest-users] Strange error when running simulation in equest 3-65

[Julien Marrec]

Hi,

I got this type of errors several times too, and I suspect this is not
really a syntax error in the inp file since usually closing equest, logging
off windows and on again fixes it.

It's annoying but I haven't found why it's doing that.

best,
Julien

--
Julien Marrec, EBCP, BPI MFBA
Energy&Sustainability Engineer
T: +33 6 95 14 42 13

LinkedIn (en) : www.linkedin.com/in/julienmarrec
LinkedIn (fr) : www.linkedin.com/in/julienmarrec/fr
<http://www.linkedin.com/in/julienmarrec>

2014-10-17 10:30 GMT+02:00 tiejun hu <hutiejun1223 at 126.com>:

> Does anybody encount this error?
>  it shows a error shown in the first attached picture when running
> simulation,  then i click "done", it shows the sencond attached picture, if
> i close it, the software will exit.
>  Is it a bug or some setting problem?
>
> Best Regards
> Tiejun
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20141017/5bb301f0/attachment.htm>