[Equest-users] How to model VAV boxes and Parallel PIU boxes in one RTU

[Brian Davis]

Are you sure that you can use appendix G for CI?  I thought that CI
required that you use the Energy Cost Budget Method (ie chapter 11).

*Brian Davis, PE, CEM*
Dwyer Engineering
552 Fort Evans Road NE
Suite 200
Leesburg, VA 20176
703-777-5988 x110 (office)
703-439-2588 (fax)
304-582-7689 (cell)
www.dwyer.com

On Tue, Oct 21, 2014 at 2:40 PM, Morteza Kasmai <morteza.kasmai at gmail.com>
wrote:

> Hello all,
>
>
>
> I’m working on a CI project that its C&S had a RTU with VAV boxes.
> The interior zones in the CI (proposed design) use the same RTU but with
> series fan power VAV boxes. To model this project correctly per Appendix G
> (for EAc3.1 credit) should I select PUI system and then change the terminal
> type of C&S zones from parallel PIU to standard VAV terminal or there are
> other ways to model this CI project in eQUEST?
>
>
>
> Thank you for your help,
> Morteza
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20141021/f45f2a25/attachment.htm>