[Equest-users] occupancy type

[Jones, Christopher]

Hello,
You have to select the “Library” Building Type, then select the appropriate Occupancy Type.

Christopher Jones, P.Eng.
Tel: 416.644.4226 • Toll Free: 1.888.425.7255 x 527

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Siliang Lu
Sent: Saturday, February 21, 2015 7:12 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] occupancy type

[Inline image 1]
Hello everyone,
I have problem in selecting the suitable occupancy type. As shown in the figure, I do not find the occupancy type of the library. Can I create a new occupancy type according to ASHRAE 62.1? In addition, can I just adjust the sensible heat gain and the latent  heat gain values instead of selecting suitable occupancy type to correctly get the internal loads?

Thanks a lot!

Best.
Siliang

______________________________________________________________________
NOTICE: This communication and any attachments ("this message") may contain confidential information for the sole use of the intended recipient(s). Any unauthorized use, disclosure, viewing, copying, alteration, dissemination or distribution of, or reliance on this message is strictly prohibited. If you have received this message in error, or you are not an authorized recipient, please notify the sender immediately by replying to this message, delete this message and all copies from your e-mail system and destroy any printed copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150223/4df96052/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 30800 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150223/4df96052/attachment.png>