[Equest-users] Equest-users Digest

[Julien Marrec]

Might not solve your problem but can't hurt: If you're on Windows 7 or 8,
make sure you put the compatibility settings to XP (Service Pack 3)

Cheers,
Julien

--
Julien Marrec, EBCP, BPI MFBA
Energy&Sustainability Engineer
T: +33 6 95 14 42 13

LinkedIn (en) : www.linkedin.com/in/julienmarrec
LinkedIn (fr) : www.linkedin.com/in/julienmarrec/fr
<http://www.linkedin.com/in/julienmarrec>

2015-01-12 15:01 GMT+01:00 Nufal, Maye <Maye.Nufal at stantec.com>:

> Thanks Keith,
>
> I  am still facing this issue and the software keeps on crashing . It
> keeps freezing upon pressing the large buttons.
>
> The same project file works fine on other machines. It seems to be an
> installation issue.
>
> Are there any specific installation requirements / guidelines available
> for admins ?
>
> Maye
>
> Maye Nufal
> Sustainable Buildings Consultant/Energy Modeler
> Stantec
> Phone: 416-598-7157
> Maye.Nufal at stantec.com
>
> stantec.com
>
> Celebrating 60 years of community, creativity, and client relationships.
>
> The content of this email is the confidential property of Stantec and
> should not be copied, modified, retransmitted, or used for any purpose
> except with Stantec's written authorization. If you are not the intended
> recipient, please delete all copies and notify us immediately.
>
> Please consider the environment before printing this email.
>
> -----Original Message-----
> From: Keith Swartz [mailto:kswartz at ecw.org]
> Sent: January-09-15 9:37 AM
> To: Nufal, Maye; equest-users at lists.onebuilding.org
> Subject: Re: [Equest-users] Equest-users Digest
>
> Maye,
>
> This is a fairly common problem. Try the following; if one step doesn't
> fix it, try the next...
> 1. Right-click on the background of the 3-D view, click on "Reset Camera."
> 2. Click on "Project & Site" (or one of those large buttons near the top)
> and click back on "Building Shell", then the"3-D Geometry" tab.
> 3. Run the simulation.
> 4. Close eQUEST and reopen.
> 5. Reboot.
>
> Hope this helps!
>
> Keith Swartz, PE, BEMP, LEED AP
> Senior Energy Engineer | Energy Center of Wisconsin |
> Madison.Chicago.Minneapolis
> 608.210.7123 | www.ecw.org
>
> -----Original Message-----
> From: Nufal, Maye [mailto:Maye.Nufal at stantec.com]
> Sent: Thursday, January 08, 2015 2:52 PM
> To: equest-users at lists.onebuilding.org
> Subject: Re: [Equest-users] Equest-users Digest
>
> Hi ,
>
> I have a fully working model (eQuest 3.64 ) .. Gets out of wizard normally
> , simulation works properly , spreadsheets all there except  .. 3D Model is
> not being displayed at all.
>
> I'm using a fairly powerful machine ; not sure if it is a resolution or
> memory problem ??!
>
> Has anyone come across the same problem?
>
>
> Thanks.'
> Maye
>
> Maye Nufal
> Sustainable Buildings Consultant/Energy Modeler Stantec
> Phone: 416-598-7157
> Maye.Nufal at stantec.com
>
> stantec.com
>
> Celebrating 60 years of community, creativity, and client relationships.
>
> The content of this email is the confidential property of Stantec and
> should not be copied, modified, retransmitted, or used for any purpose
> except with Stantec's written authorization. If you are not the intended
> recipient, please delete all copies and notify us immediately.
>
> Please consider the environment before printing this email.
>
> -----Original Message-----
> From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On
> Behalf Of equest-users-request at lists.onebuilding.org
> Sent: January-06-15 6:22 PM
> To: equest-users at lists.onebuilding.org
> Subject: Equest-users Digest, Vol 82, Issue 3
>
> Send Equest-users mailing list submissions to
>         equest-users at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
> or, via email, send a message with subject or body 'help' to
>         equest-users-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         equest-users-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of Equest-users digest..."
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150112/de3a28df/attachment.htm>