[Equest-users] Thermal mass effects of interior walls

[Jeff Haberl]

Hello Peter,

Create layered walls with the materials you intend to simulate and then set the floor weight = 0 to trigger custom weighting factors. You may have to fiddle with the interior convection/radiation coefficient to get a meaningful “connection” to the room air node.

Jeff

8=!  8=)  :=)  8=)  ;=)  8=)  8=(  8=)  8=()  8=)  8=|  8=)  :=')  8=) 8=?
Jeff S. Haberl, Ph.D.,P.E.inactive,FASHRAE,FIBPSA,......jhaberl at tamu.edu<mailto:........jhaberl at tamu.edu>
Professor........................................................................Office Ph: 979-845-6507
Department of Architecture............................................Lab Ph:979-845-6065
Energy Systems Laboratory...........................................FAX: 979-862-2457
Texas A&M University...................................................77843-3581
College Station, Texas, USA, 77843..............................URL:www.esl.tamu.edu
8=/  8=)  :=)  8=)  ;=)  8=)  8=()  8=)  :=)  8=)  8=!  8=)  8=? 8=) 8=0

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Peter Schonherr
Sent: Wednesday, June 17, 2015 10:26 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Thermal mass effects of interior walls

Hello,

      Is it possible to model the effects of thermal mass of interior walls? if so, how is that done?

Peter Schonherr

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150617/d46587e3/attachment.htm>