[Equest-users] Modelling thermal zone with multiple AHUs

[Anura Perera]

Dear All,

I am modelling a building having thermal blocks with multiple thermal
zones. Each thermal zone has an AHU. The floor level internal loads are
evenly distributed. As such I am planning to model the thermal block
considering all AHUs in the thermal block as lumped into one large AHU with
total capacity of all individual AHUs of zones in the block.

Will this be an acceptable approach for LEED reviewers?

Any experience to share please?

Thanks in advance
Anura
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150305/534d98c1/attachment.htm>