[Equest-users] eQuest LPD input output disagree

[Sami, Vikram]

Dale,

Curious. Could you attach your inp file?

Vikram Sami
AIA, BEMP, LEED BD+C
Associate Partner



ZGF ARCHITECTS LLP
T 206.521.3509 E vikram.sami at zgf.com
925 Fourth Avenue, Suite 2400
Seattle, WA 98104


From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Nicholas Caton
Sent: Wednesday, May 06, 2015 1:51 PM
To: Dale elegant; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] eQuest LPD input output disagree

The EUI figures reported on BEPU use the building area entered in the following location (if entered).  You might check here first to see if it reads 700,000 or something else:
[cid:image001.png at 01D088A9.A9F3C480]

NICK CATON, P.E.
Owner

Caton Energy Consulting
  1150 N. 192nd St., #4-202
  Shoreline, WA 98133
  office:  785.410.3317
www.catonenergy.com

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org<mailto:equest-users-bounces at lists.onebuilding.org>] On Behalf Of Dale elegant
Sent: Wednesday, May 06, 2015 10:49 AM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: [Equest-users] eQuest LPD input output disagree

Dear all:

I'm modeling a 700000 sqft warehouse, everything works fine, except in BEPU report it shows a 360.310 KWH /SQFT-YR GROSS-AREA, which doesn't make any sense. The utility rates are correct, under Quality control reports, it indicates errors of the peak lighting load of 67.74 w/sqft and peak miscellaneous equipment load of 40.91 w/sqft. I did input LPD and EPD with around 0.6 w/sqft and 0.5 w/sqft, the corresponding schedules are correct, the building area in each floor and each zone are correct, the total energy demand looks about right for the size of building.

But at some point the model makes the LPD output 100 times bigger than what I input, I would appreciate it if you could provide me with any advices, thanks!

Qing



















ZGF Email Disclaimer<https://www.zgf.com/ZGF_Email_Disclaimer.html>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150507/3fefc09d/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 28250 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150507/3fefc09d/attachment.png>