[Equest-users] HUGE PDL file

Nathan Miller nathanm at rushingco.com
Fri Sep 4 14:02:47 PDT 2015

I would note that you should save you .prd file as well if you set up any parametric runs.

Nathan Miller, PE, LEED AP BD+C – Mechanical Engineer/Senior Energy Analyst
RUSHING | D 206-788-4577 | O 206-285-7100

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Julien Marrec
Sent: Friday, September 04, 2015 4:55 PM
To: Jeff Ross-Bain <jeff at rbgb.com>
Cc: <equest-users at lists.onebuilding.org> <equest-users at lists.onebuilding.org>
Subject: Re: [Equest-users] HUGE PDL file

Delete everything but the inp and pd2.

I've got no explanation as to why it's huge, but I've been doing that successfully

Envoyé de mon iPhone

Le 4 sept. 2015 à 22:52, "Jeff Ross-Bain" <jeff at rbgb.com<mailto:jeff at rbgb.com>> a écrit :
Hi Equest world,
I am having a tough time opening and accessing a relatively small Equest 3,65 model (it worked a short time ago).
Looking at the files, I notice that the *.PDL file is over 2.6 GB in size…usually these are 100-800 kb!!
Any idea what could be the problem?

Jeff Ross-Bain, PE, LEED Fellow
404-220-8940 Office
404-220-8955 Direct

Build Green. Save Time.
Equest-users mailing list
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150904/fd0ca789/attachment.htm>

More information about the Equest-users mailing list