[Hap-users] roof / attic

varun kulkarni seldomvarun at gmail.com
Tue May 10 12:39:24 PDT 2011


Usually the attic is ventillated. I assume it to be a partition load , just
to be on the safe side.


On Tue, May 10, 2011 at 3:05 PM, Luke Yantis <lukeyantis at eeace.com> wrote:

>
>
> All,
>
>
>
> If you have an unconditioned attic space not functioning as a plenum, is it
> correct to model the roof and ceiling as one layer? That is, can you assume
> all heat gain / loss through the roof is also transmitted to / from the
> space? I would assume not since air is an insulator, however treating the
> ceiling as a partition & guessing the attic temperatures at outside design
> extremes is too much of a wild guess in my opinion.
>
>
>
> Any comments on this would be appreciated.
>
>
>
> Thanks,
>
>
>
> Luke
>
> 512-744-4437
>
> EEA Consulting Engineers
>
> Austin, TX
>
>
>
>
>
>
>
>
> NOTE: This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they are
> addressed. If you have received this email in error please delete. Please
> note that any views or opinions presented in this email are solely those of
> the author and do not necessarily represent those of the company. Finally,
> the recipient should check this email and any attachments for the presence
> of viruses. We accept no liability for any damage caused by any virus
> transmitted by this email. | EEA Consulting Engineers
>
> _______________________________________________
> Hap-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/hap-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> HAP-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 

Thanks and Best Regards,



Sincerely,

Varun Kulkarni , M.S. , EIT



Note: Please do not print, unless required.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/hap-users-onebuilding.org/attachments/20110510/91e88138/attachment-0002.htm>


More information about the Hap-users mailing list