[Trace-users] Revit Export and import into Trace (Bob Vogt)

[Bob Vogt]

I have been playing with Revit to Trace and back today. As long as you
are using Revit MEP 2010 it may be worth the time. You need a good arch
model to start with. If there are a lot of interior voids you will have
a lot of walls that are not really their. There is a good white paper
out that helps in understanding.

Before I go much further, is this a complex job or relatively small? If
you still need help I may be able to assist.

Bob Vogt 

-----Original Message-----
From: trace-users-bounces at lists.onebuilding.org
[mailto:trace-users-bounces at lists.onebuilding.org] On Behalf Of
trace-users-request at lists.onebuilding.org
Sent: Wednesday, November 04, 2009 3:07 PM
To: trace-users at lists.onebuilding.org
Subject: Trace-users Digest, Vol 16, Issue 3

Send Trace-users mailing list submissions to
	trace-users at lists.onebuilding.org

To subscribe or unsubscribe via the World Wide Web, visit
	
http://lists.onebuilding.org/listinfo.cgi/trace-users-onebuilding.org
or, via email, send a message with subject or body 'help' to
	trace-users-request at lists.onebuilding.org

You can reach the person managing the list at
	trace-users-owner at lists.onebuilding.org

When replying, please edit your Subject line so it is more specific than
"Re: Contents of Trace-users digest..."


Today's Topics:

   1. Revit Export and import into Trace? (Jason Wendel)
   2. Re: Revit Export and import into Trace? (Mike Casella)
   3. Re: Revit Export and import into Trace? (Jeff Buscher)
   4. Re: Revit Export and import into Trace? (Jason Wendel)
   5. Re: Revit Export and import into Trace? (Sturm, Eric A.)


----------------------------------------------------------------------

Message: 1
Date: Wed, 4 Nov 2009 08:40:33 -0700
From: "Jason Wendel" <jwendel at heatheng.com>
To: <trace-users at lists.onebuilding.org>
Subject: [Trace-users] Revit Export and import into Trace?
Message-ID:
	<749360CBA533F042BE4E516C70D995ABA82F44 at hec2003.heatheng.local>
Content-Type: text/plain; charset="us-ascii"

I know it's possible, but how practical is it to export a file from
Revit and import it into Trace 700 for calculations?  AND, how do you do
it?

 

-Jason

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/atta
chments/20091104/1df215de/attachment.html>

------------------------------

Message: 2
Date: Wed, 4 Nov 2009 10:54:24 -0500
From: "Mike Casella" <mcasella at yeatonassociates.com>
To: <trace-users at lists.onebuilding.org>
Subject: Re: [Trace-users] Revit Export and import into Trace?
Message-ID: <ACF9C70ACD65DE4898B83B0B34788669325A37 at YEATON.ya.local>
Content-Type: text/plain; charset="us-ascii"

Hi Jason,

 

In my opinion you can never really assume that all of the export
information that you extract from Revit is going to directly import into
Trace without you having to "tweak" things after you import it.  In
order to do it, you basically have to export your infomation to a gbXML
file.  Once you save that somewhere, you then import it into Trace as a
gbXML file and it should ask you what information you actually want to
import. 

 

I don't know if this helps you, but this has been my experience.

 

Mike Casella

 

YEATON ASSOCIATES, INC.

66 Jackson Street, Littleton, NH 03561

tel 603-444-6578  fax 603-444-2364

web www.yeatonassociates.com <http://www.yeatonassociates.com/> 

mcasella at yeatonassociates.com

 

From: trace-users-bounces at lists.onebuilding.org
[mailto:trace-users-bounces at lists.onebuilding.org] On Behalf Of Jason
Wendel
Sent: Wednesday, November 04, 2009 10:41 AM
To: trace-users at lists.onebuilding.org
Subject: [Trace-users] Revit Export and import into Trace?

 

I know it's possible, but how practical is it to export a file from
Revit and import it into Trace 700 for calculations?  AND, how do you do
it?

 

-Jason

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/atta
chments/20091104/82db7735/attachment-0001.htm>

------------------------------

Message: 3
Date: Wed, 4 Nov 2009 10:52:26 -0500
From: Jeff Buscher <jeff.buscher at gmail.com>
To: Jason Wendel <jwendel at heatheng.com>
Cc: trace-users at lists.onebuilding.org
Subject: Re: [Trace-users] Revit Export and import into Trace?
Message-ID:
	<deb361d00911040752k618bf797x8e1e0026e7fa294a at mail.gmail.com>
Content-Type: text/plain; charset="windows-1252"

Revit:  export gbXML
Trace:  File/Import gbXML

I've imported files to see how it does, but I haven't actually used it
yet.
It seems to ignore exterior shading, which is the main thing I was
hoping to get from it.




On Wed, Nov 4, 2009 at 10:40 AM, Jason Wendel <jwendel at heatheng.com>
wrote:

>  I know it?s possible, but how practical is it to export a file from 
> Revit and import it into Trace 700 for calculations?  AND, how do you
do it?
>
>
>
> -Jason
>
>
>
> _______________________________________________
> Trace-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/trace-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to 
> TRACE-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/atta
chments/20091104/16c9bad3/attachment-0001.htm>

------------------------------

Message: 4
Date: Wed, 4 Nov 2009 08:54:46 -0700
From: "Jason Wendel" <jwendel at heatheng.com>
To: <trace-users at lists.onebuilding.org>
Subject: Re: [Trace-users] Revit Export and import into Trace?
Message-ID:
	<749360CBA533F042BE4E516C70D995ABA82F45 at hec2003.heatheng.local>
Content-Type: text/plain; charset="us-ascii"

One of my problems is getting it to recognize the room names so I can
distinguish which room is which when it's imported into Trace.  It just
names it from 1 to whatever.  How do I get it to recognize the names
from the revit file?

 

-Jason

 

From: Jeff Buscher [mailto:jeff.buscher at gmail.com]
Sent: Wednesday, November 04, 2009 8:52 AM
To: Jason Wendel
Cc: trace-users at lists.onebuilding.org
Subject: Re: [Trace-users] Revit Export and import into Trace?

 

Revit:  export gbXML
Trace:  File/Import gbXML

I've imported files to see how it does, but I haven't actually used it
yet.  It seems to ignore exterior shading, which is the main thing I was
hoping to get from it.





On Wed, Nov 4, 2009 at 10:40 AM, Jason Wendel <jwendel at heatheng.com>
wrote:

I know it's possible, but how practical is it to export a file from
Revit and import it into Trace 700 for calculations?  AND, how do you do
it?

 

-Jason

 


_______________________________________________
Trace-users mailing list
http://lists.onebuilding.org/listinfo.cgi/trace-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
TRACE-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/atta
chments/20091104/807ad54f/attachment-0001.htm>

------------------------------

Message: 5
Date: Wed, 4 Nov 2009 11:22:06 -0500
From: "Sturm, Eric A." <ESturm at trane.com>
To: Jeff Buscher <jeff.buscher at gmail.com>, Jason Wendel
	<jwendel at heatheng.com>
Cc: "trace-users at lists.onebuilding.org"
	<trace-users at lists.onebuilding.org>
Subject: Re: [Trace-users] Revit Export and import into Trace?
Message-ID:
	
<6CDA92487C88BE4BBE1A050B176539F64B0470A4E0 at ISR-NAMSG-02.mgdir.irco.com>
	
Content-Type: text/plain; charset="us-ascii"

There are a couple changes for TRACE with respect to gbXML.  In version
6.2.2 and later, you have the ability to use the Name entered in Revit
as the space name in the TRACE file.

[cid:508201816 at 04112009-1467]

TRACE does not import external shading.

Eric Sturm
CDS Marketing Engineer
Trane Commercial Systems
Ingersoll Rand
3600 Pammel Creek Rd
La Crosse, WI 54601

Office:  +1.608.787.3926
Fax:  +1.608.787.3005
Email:  cdshelp at trane.com<mailto:cdshelp at trane.com>
Website:  www.tranecds.com<http://www.tranecds.com/>



________________________________
From: trace-users-bounces at lists.onebuilding.org
[mailto:trace-users-bounces at lists.onebuilding.org] On Behalf Of Jeff
Buscher
Sent: Wednesday, November 04, 2009 9:52 AM
To: Jason Wendel
Cc: trace-users at lists.onebuilding.org
Subject: Re: [Trace-users] Revit Export and import into Trace?

Revit:  export gbXML
Trace:  File/Import gbXML

I've imported files to see how it does, but I haven't actually used it
yet.  It seems to ignore exterior shading, which is the main thing I was
hoping to get from it.




On Wed, Nov 4, 2009 at 10:40 AM, Jason Wendel
<jwendel at heatheng.com<mailto:jwendel at heatheng.com>> wrote:
I know it's possible, but how practical is it to export a file from
Revit and import it into Trace 700 for calculations?  AND, how do you do
it?

-Jason


_______________________________________________
Trace-users mailing list
http://lists.onebuilding.org/listinfo.cgi/trace-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
TRACE-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:TRACE-USERS-UNSUBSCRIBE at O
NEBUILDING.ORG>



________________________________
The information contained in this message is privileged and intended
only for the recipients named. If the reader is not a representative of
the intended recipient, any review, dissemination or copying of this
message or the information it contains is prohibited. If you have
received this message in error, please immediately notify the sender,
and delete the original message and attachments.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/atta
chments/20091104/a4ca5c9b/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Outlook.jpg
Type: image/jpeg
Size: 15749 bytes
Desc: Outlook.jpg
URL:
<http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/atta
chments/20091104/a4ca5c9b/attachment-0001.jpg>

------------------------------

_______________________________________________
Trace-users mailing list
Trace-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trace-users-onebuilding.org


End of Trace-users Digest, Vol 16, Issue 3
******************************************