[Trace-users] Modeling Munters OA Units

[Jason Boehning]

All,

Has anyone modeled a Munters dedicated outside air unit in Trace? The type of unit I am trying to model is 100% OA with 100% outside air for regeneration air. So the outside air comes in, passes through a pre coiling coil, then the main coiling coil and then through a desiccant wheel. The regeneration air comes in, passes through a condenser coil to heat up and then through the desiccant wheel to remove the moisture out of the wheel and then exhausted to the outside. I have some ideas of how to do it, but just want to see if anyone has experience doing it. I appreciate any help I can get.

Regards,

Jason Boehning, EIT
BIM Technology Manager
[cid:image001.gif at 01CCA43F.274797C0]
6161 Savoy, Suite 1212
Houston, Texas  77036

 v.  713.482.2322
 f.   713.482.2314
 e. Jason.Boehning at ricegardner.com<mailto:Jason.Boehning at ricegardner.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20111116/ffd89092/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 3662 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20111116/ffd89092/attachment.gif>