Dear TRNSYS users,
I have a problem in running optimization with genopt and trnsys17.
I create .b17 and .dck files that work properly. I change the parameters
value with their name in order to create the template files but once I run
genopt, it starts running trnsys but I have the following trnsys error
message (see also error1.jpg and error2.jpg).
In previous messages I have read that the problem could be the path of
the input files. I have written the entire path for all the input
files, but the problem still remains.
Any suggestions?
Kind regards
Error message:
**************
java.lang.Exception:
Exception in executing the simulation program
Simulation working directory : 'C:\Documents and Settings\Windows
xp\Escritorio\Tesia\Opt\tmp-genopt-run-1'
Command string : 'C:\Trnsys17\Exe\TRNExe.exe
"C:\Documents and Settings\Windows
xp\Escritorio\Tesia\Opt\tmp-genopt-run-1\GenOptRun.dck" /n'
Exception message:
Error in executing the simulation program
Exit value of the simulation program: -1073741800
Working directory : 'C:\Documents and
Settings\Windows xp\Escritorio\Tesia\Opt\tmp-genopt-run-1'.
Current command String : 'C:\Trnsys17\Exe\TRNExe.exe
"C:\Documents and Settings\Windows
xp\Escritorio\Tesia\Opt\tmp-genopt-run-1\GenOptRun.dck" /n'.
Error stream of simulation program : Simulation program did not
return an error stream.
GenOpt terminated with error.
Ivan Flores
Lecturer of Heat Transfer
Department of Thermal Engineering / Departamento de Máquinas y Motores
térmicos
Engineering School of Bilbao / E.T.S. de IngenierÃa de Bilbao; EHU / UPV
Address: E.T.S. de IngenierÃa de Bilbao, Alameda Urquijo s/n, 48013
BILBAO, (Spain)
Phone: +34 946018214 Fax: +34 946014283
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Error1.jpg
Type: image/jpeg
Size: 78851 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120820/b0b6e287/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Error2.jpg
Type: image/jpeg
Size: 148515 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120820/b0b6e287/attachment-0003.jpg>
-------------- next part --------------
TRNSYS - the TRaNsient SYstem Simulation program
The Solar Energy Lab at the University of Wisconsin - Madison, USA
Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France
Transsolar Energietechnik GmBH, Stuttgart, Germany
Thermal Energy System Specialists, LLC, Madison Wisconsin, USA
Release 17.00.0019
Listing file for: "C:\Documents and Settings\Windows xp\Escritorio\Tesia\Opt\tmp-genopt-run-1\GenOptRun.dck"
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Trnsys17\Exe"
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 208
TRNSYS Message 75 : The Type referenced below requires descriptors instead of initial values.
Reported information : Type 208
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 535
TRNSYS Message 75 : The Type referenced below requires descriptors instead of initial values.
Reported information : Type 535
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 580
TRNSYS Message 76 : The following Type has been identified as allowing the unit specifications (kg/h for example) after the input specifications and intial values for the inputs. The critical parameter number, and the value of this critical parameter that indicates that the units will be supplied is also listed. This information was retrieved from the VarUnits.dat file loacted in the \Exe directory of your TRNSYS 16 installation.
Reported information : Type 580, Critical Parameter 11, Parameter Value 1
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 580
TRNSYS Message 88 : The following Type has been identified as allowing FORMAT statements. This information was retrieved from the Formats.dat file loacted in the \Exe directory of your TRNSYS 16 installation.
Reported information : Type 580
*** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors.
*** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal errors found.
*** Evaluating the EQUATIONs and CONSTANTs to determine their initial values.
*** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin processing the remainder of the TRNSYS input file.
VERSION 17
*******************************************************************************
*** TRNSYS input file (deck) generated by TrnsysStudio
*** on lunes, agosto 20, 2012 at 09:22
*** from TrnsysStudio project: C:\Documents and Settings\Windows xp\Escritorio\Tesia\Opt\Optimize.tpf
***
*** If you edit this file, use the File/Import TRNSYS Input File function in
*** TrnsysStudio to update the project.
***
*** If you have problems, questions or suggestions please contact your local
*** TRNSYS distributor or mailto:software at cstb.fr
***
*******************************************************************************
*******************************************************************************
*** Units
*******************************************************************************
*******************************************************************************
*** Control cards
*******************************************************************************
* START, STOP and STEP
CONSTANTS 3
START=0
STOP=8760
STEP=1
* User defined CONSTANTS
! Start time End time Time step
SIMULATION 0.0000000000000000E+00 8.7600000000000000E+03 1.0000000000000000E+00
! Integration Convergence
TOLERANCES 1.0000000000000002E-03 1.0000000000000002E-03
! Max iterations Max warnings Trace limit
LIMITS 30 500 51
! TRNSYS numerical integration solver method
DFQ 1
! TRNSYS output file width, number of characters
WIDTH 80
! NOLIST statement
LIST
! MAP statement
! Solver statement Minimum relaxation factor Maximum relaxation factor
SOLVER 0
1.000000000000000
1.000000000000000
! Nan DEBUG statement
NAN_CHECK 0
! Overwrite DEBUG statement
OVERWRITE_CHECK 0
! disable time report
TIME_REPORT 0
! EQUATION SOLVER statement
EQUATION SOLVING METHOD 0
* Model "Type109-TMY2" (Type 109)
*
UNIT 3 TYPE 109
*$UNIT_NAME Type109-TMY2
*$MODEL .\Weather Data Reading and Processing\Standard Format\TMY2\Type109-TMY2.tmf
*$POSITION 82 106
*$LAYER Weather - Data Files #
PARAMETERS 4
! 1 Data Reader Mode
! 2 Logical unit
! 3 Sky model for diffuse radiation
! 4 Tracking mode
2.0000000000000000E+00 3.1000000000000000E+01 4.0000000000000000E+00 1.0000000000000000E+00
INPUTS 9
! [unconnected] Ground reflectance
! [unconnected] Slope of surface-1
! [unconnected] Azimuth of surface-1
! [unconnected] Slope of surface-2
! [unconnected] Azimuth of surface-2
! [unconnected] Slope of surface-3
! [unconnected] Azimuth of surface-3
! [unconnected] Slope of surface-4
! [unconnected] Azimuth of surface-4
CONST CONST CONST CONST CONST
CONST CONST CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000001E-01 9.0000000000000000E+01 1.8000000000000000E+02 9.0000000000000000E+01 -9.0000000000000000E+01
9.0000000000000000E+01 9.0000000000000000E+01 9.0000000000000000E+01 0.0000000000000000E+00
*** External files
ASSIGN C:\Documents and Settings\Windows xp\Escritorio\Tesia\Opt\Climatic data\Malaga_A3.tm2 31
*|? Weather data file |1000
*------------------------------------------------------------------------------
* Model "Type56b" (Type 56)
*
UNIT 4 TYPE 56
*$UNIT_NAME Type56b
*$MODEL .\Loads and Structures\Multi-Zone Building\Without Standard Output Files\Type56b.tmf
*$POSITION 508 155
*$LAYER Main #
*$#
PARAMETERS 3
! 1 Logical unit for building description file (.bui)
! 2 Star network calculation switch
! 3 Weighting factor for operative temperature
3.2000000000000000E+01 0.0000000000000000E+00 5.0000000000000000E-01
INPUTS 22
! Type109-TMY2:Ambient temperature -> 1- TAMB
! Type109-TMY2:relative humidity -> 2- RELHUMAMB
! Type69b:Fictive sky temperature -> 3- TSKY
! Type109-TMY2:Ambient temperature -> 4- TSGRD
! Type109-TMY2:solar zenith angle -> 5- AZEN
! Type109-TMY2:solar azimuth angle -> 6- AAZM
! Type109-TMY2:total radiation on tilted surface-1 -> 7- IT_NORTH
! Type109-TMY2:total radiation on tilted surface-4 -> 8- IT_SOUTH
! Type109-TMY2:total radiation on tilted surface-2 -> 9- IT_EAST
! Type109-TMY2:total radiation on tilted surface-3 -> 10- IT_WEST
! Type109-TMY2:total radiation on horizontal -> 11- IT_HORIZONTAL
! Type109-TMY2:beam radiation on tilted surface-1 -> 12- IB_NORTH
! Type109-TMY2:beam radiation on tilted surface-4 -> 13- IB_SOUTH
! Type109-TMY2:beam radiation on tilted surface-2 -> 14- IB_EAST
! Type109-TMY2:beam radiation on tilted surface-3 -> 15- IB_WEST
! Type109-TMY2:beam radiation on horitonzal -> 16- IB_HORIZONTAL
! Type109-TMY2:angle of incidence for tilted surface -1 -> 17- AI_NORTH
! Type109-TMY2:angle of incidence for tilted surface -4 -> 18- AI_SOUTH
! Type109-TMY2:angle of incidence for tilted surface -2 -> 19- AI_EAST
! Type109-TMY2:angle of incidence for tilted surface -3 -> 20- AI_WEST
! Type109-TMY2:angle of incidence on horizontal surface -> 21- AI_HORIZONTAL
! [unconnected] 22- GRDREF
3,1 3,2 5,1 3,1 3,10
3,11 3,18 3,36 3,24 3,30
3,12 3,19 3,37 3,25 3,31
3,13 3,22 3,40 3,28 3,34
3,16 CONST
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 2.0000000000000001E-01
*** External files
ASSIGN C:\Documents and Settings\Windows xp\Escritorio\Tesia\Opt\GenOptRun.b17 32
*|? Building description file (*.bui) |1000
*------------------------------------------------------------------------------
* Model "Type69b" (Type 69)
*
UNIT 5 TYPE 69
*$UNIT_NAME Type69b
*$MODEL .\Physical Phenomena\Sky Temperature\calculate cloudiness factor\Type69b.tmf
*$POSITION 274 243
*$LAYER Main #
PARAMETERS 2
! 1 mode for cloudiness factor
! 2 height over sea level
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 4
! Type109-TMY2:Ambient temperature ->Ambient temperature
! Type33e:Dew point temperature. ->Dew point temperature at ambient conditions
! Type109-TMY2:beam radiation on horitonzal ->Beam radiation on the horizontal
! Type109-TMY2:sky diffuse radiation on horizontal ->Diffuse radiation on the horizontal
3,1 6,8 3,13 3,14
*** INITIAL INPUT VALUES
0.0000000000000000E+00 2.0000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type33e" (Type 33)
*
UNIT 6 TYPE 33
*$UNIT_NAME Type33e
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Relative Humidity Known\Type33e.tmf
*$POSITION 274 109
*$LAYER Main #
PARAMETERS 3
! 1 Psychrometrics mode
! 2 Wet bulb mode
! 3 Error mode
2.0000000000000000E+00 1.0000000000000000E+00 2.0000000000000000E+00
INPUTS 3
! Type109-TMY2:Ambient temperature ->Dry bulb temp.
! Type109-TMY2:relative humidity ->Percent relative humidity
! [unconnected] Pressure
3,1 3,2 CONST
*** INITIAL INPUT VALUES
2.2000000000000000E+01 6.0000000000000000E+01 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type65d" (Type 65)
*
UNIT 7 TYPE 65
*$UNIT_NAME Type65d
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 732 155
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 2.0000000000000000E+00 1.8000000000000000E+01 2.8000000000000000E+01 0.0000000000000000E+00
8.0000000000000000E+02 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 4
! Type56b: 1- TAIR_CUBE ->Left axis variable-1
! Type56b: 8- TSI_S4 ->Left axis variable-2
! Type56b: 44- QHEAT_CUBE ->Right axis variable-1
! Type56b: 45- QCOOL_CUBE ->Right axis variable-2
4,1 4,8 4,44 4,45
*** INITIAL INPUT VALUES
Tair_cube Tsi_S4 Q_heat Q_coo l
LABELS 3
Temperatures
Heat fluxes
Graph 1
*------------------------------------------------------------------------------
* Model "Type25b" (Type 25)
*
UNIT 8 TYPE 25
*$UNIT_NAME Type25b
*$MODEL .\Output\Printer\Unformatted\User-Supplied Units\Type25b.tmf
*$POSITION 455 52
*$LAYER Outputs #
PARAMETERS 10
! 1 Printing interval
! 2 Start time
! 3 Stop time
! 4 Logical unit
! 5 Units printing mode
! 6 Relative or absolute start time
! 7 Overwrite or Append
! 8 Print header
! 9 Delimiter
! 10 Print labels
1.0000000000000000E+00 0.0000000000000000E+00 8.7600000000000000E+03 3.3000000000000000E+01 1.0000000000000000E+00
0.0000000000000000E+00 -1.0000000000000000E+00 -1.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
INPUTS 17
! Type109-TMY2:Ambient temperature ->Input to be printed-1
! Type56b: 14- TSO_S4 ->Input to be printed-2
! Type56b: 8- TSI_S4 ->Input to be printed-3
! Type56b: 1- TAIR_CUBE ->Input to be printed-4
! Type109-TMY2:total radiation on tilted surface-4 ->Input to be printed-5
! Type56b: 44- QHEAT_CUBE ->Input to be printed-6
! Type56b: 45- QCOOL_CUBE ->Input to be printed-7
! Type56b: 23- QABSO_S4 ->Input to be printed-8
! Type56b: 21- QCOMO_S4 ->Input to be printed-9
! Type56b: 24- QSKY_S4 ->Input to be printed-10
! Type56b: 22- QABSI_S4 ->Input to be printed-11
! Type56b: 15- QCOMI_S4 ->Input to be printed-12
! Type56b: 41- QABSILW_S4 ->Input to be printed-13
! Type56b: 35- QSICONV_S4 ->Input to be printed-14
! Type56b: 25- TSTAR_CUBE ->Input to be printed-15
! Equa:Qi ->Input to be printed-16
! Equa:Bqi ->Input to be printed-17
3,1 4,14 4,8 4,1 3,36
4,44 4,45 4,23 4,21 4,24
4,22 4,15 4,41 4,35 4,25
QI BQI
*** INITIAL INPUT VALUES
Ambient TSO_S4 TSI_S4 TAIR_ CUBE Rad_GV
QHEAT_CUBE QCOOL_CUBE QABSO_S4 QCOMO _S4 QSKY_S4
QABSI_S4 QCOMI_S4 QABSILW_S4 QSICO NV_S4 TSTAR_CUBE
Qi B_qi
ºC ºC ºC ºC kJ/hr·m2
kJ/hr kJ/hr kJ/hr kJ/hr kJ/hr
kJ/hr kJ/hr kJ/hr kJ/hr ºC
kJ/hr kJ/hr
*** External files
ASSIGN C:\Documents and Settings\Windows xp\Escritorio\Tesia\Opt\GenOptRun.xls 33
*|? Output file for printed results |1000
*------------------------------------------------------------------------------
* EQUATIONS "Equa"
*
EQUATIONS 2
Qi = +[4,41]+[4,35]
Bqi = (1-(273+[3,1])/(273+[4,8]))*Qi
*$UNIT_NAME Equa
*$LAYER Main
*$POSITION 628 52
*------------------------------------------------------------------------------
* EQUATIONS "Parametros"
*
EQUATIONS 2
ro = 316
lambda = 0.1152
*$UNIT_NAME Parametros
*$LAYER Main
*$POSITION 43 234
*------------------------------------------------------------------------------
* Model "Type28b" (Type 28)
*
UNIT 14 TYPE 28
*$UNIT_NAME Type28b
*$MODEL .\Output\Simulation Summary\Results to External File\Without Energy Balance\Type28b.tmf
*$POSITION 754 63
*$LAYER Outputs #
PARAMETERS 15
! 1 Summary interval
! 2 Summary start time
! 3 Summary stop time
! 4 Logical unit for the output file
! 5 Output mode
! 6 Operation code-1
! 7 Operation code-2
! 8 Operation code-3
! 9 Operation code-4
! 10 Operation code-5
! 11 Operation code-6
! 12 Operation code-7
! 13 Operation code-8
! 14 Operation code-9
! 15 Operation code-10
-1.0000000000000000E+00 0.0000000000000000E+00 8.7600000000000000E+03 3.4000000000000000E+01 2.0000000000000000E+00
-1.1000000000000000E+01 -4.0000000000000000E+00 -1.2000000000000000E+01 -4.0000000000000000E+00 -1.3000000000000000E+01
-4.0000000000000000E+00 -1.4000000000000000E+01 -4.0000000000000000E+00 -1.5000000000000000E+01 -4.0000000000000000E+00
INPUTS 5
! Qtotal:Qtotal ->Qtotal-1
! Type56b: 44- QHEAT_CUBE ->Qheat-2
! Type56b: 45- QCOOL_CUBE ->Qcool-3
! Equa:Qi ->Qi-4
! Equa:Bqi ->Bqi-5
QTOTAL 4,44 4,45 QI BQI
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
LABELS 5
Qtotal
Qheat
Qcool
Qi
Bqi
*** External files
ASSIGN C:\Documents and Settings\Windows xp\Escritorio\Tesia\Opt\GenOptRun.txt 34
*|? File for the summary results |1000
*------------------------------------------------------------------------------
* EQUATIONS "Qtotal"
*
EQUATIONS 1
Qtotal = [4,44]+[4,45]
*$UNIT_NAME Qtotal
*$LAYER Main
*$POSITION 607 212
*------------------------------------------------------------------------------
END
TRANSIENT SIMULATION STARTING AT TIME = 0.0000000000000000E+00
STOPPING AT TIME = 8.7600000000000000E+03
TIMESTEP = 1 / 1
DIFFERENTIAL EQUATION ERROR TOLERANCE = 1.0000000000000002E-03
ALGEBRAIC CONVERGENCE TOLERANCE = 1.0000000000000002E-03
DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 90 : TRNDll.dll is compiled in release mode. External DLLs will be loaded from the .\UserLib\ReleaseDLLs\ directory.
Reported information : Not available
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from TRNDll.dll: Type109, Type56, Type69, Type33, Type65, Type25, Type28
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "FileReader.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSApplicationsLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSControlsLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGHPLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGreenBuildingLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGroundCouplingLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSHVACLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSHydronicsLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSLoadsAndStructuresLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSOptimizationLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSSolarLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSStorageLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSUtilityLibrary_ReleaseVersion203.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type127.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type154_release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type157_demo_release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type76Lib.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type79-W.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type79Lib.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type82Lib.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 199 : TRNSYS found at least one user DLL in the UserLib directory. (Note: Only DLL's including Types that are used in the simulation are loaded)
Reported information : 0 user DLLs were loaded after searching in "C:\Trnsys17\UserLib\ReleaseDLLs"