[TRNSYS-users] Trnsys Message 127

[David BRADLEY]

Maarten,
   That error will show up if a Type has told the TRNSYS kernel that it 
is expecting (for example) 5 inputs and then the Type tries to read the 
8th input. It is almost certainly a problem in the source code although 
I'm surprised to hear a report about Type11, which has been around since 
day one! Could you please email me the project so I can debug it?
Thanks,
  David



On 8/24/2012 09:00, Maarten Sourbron wrote:
>
> Dear Trnsys users,
>
> What exactly is the meaning of the Trnsys error 127: The current Unit 
> has tried to access a Input value higher than the number of outputs 
> for the Type?
>
> It's a simple Type 11 flow diverter and a similar unit, working 
> identical does not pose problems.  If I put the inputs to constant 
> values, there is no error.
>
> Kind regards,
>
> Maarten
>
> ---
>
> PhD student
>
> Simulation of Thermal Systems Research group
>
> Departement Werktuigkunde-Department of Mechanical Engineering
>
> Katholieke Universiteit Leuven
>
> Celestijnenlaan 300A bus 2421
>
> 3001 Heverlee (Leuven)
>
> T : 0032 (0)16 32 28 73
>
> F : 0032 (0)16 32 29 85
>
> E :Maarten.Sourbron at mech.kuleuven.be  <mailto:Maarten.Sourbron at mech.kuleuven.be>
>   
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120824/75fbe723/attachment-0001.htm>