[TRNSYS-users] void as inter-zonal wall

[Eva gklezakou]

Dear Sirs,

I model a multi-zone building and there are two adjacent zones which do not
have inter-zonal wall between them, because of the geometry and
the orientation I decided not to model them as one zone. How can I assign
the lack of inter-zonal wall, is it enough if I set an air layer as the
only wall's material? Do I have to assign any other parameter in order to
be more accurate?
Thank you.

Regards,
Eva
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120702/d86abac0/attachment-0001.htm>