[TRNSYS-users] initial inside temperature of floor construction with active layer

[서정민]

Dear trnsys users,
 

Hello, I'm a user of TRNSYS 16.

I have to simulation about radiant floor cooling using active layer. 

 

For simulation, first I modeled one zone with 6 walls. And, boundary condition of all walls set to same outside dry bulb temperature (no solar radiation).

 

Zone's initial conditons were set to 30C, 65%(experiment values).

 

For example, supply water temperature is 40C, flowrate is 150kg/hr.

 

After simulation initial temperature of floor construction with active layer was different other walls. 

results=>

*Floor constuction: initial inside wall temp.=25C, initial outside wall temp.=20C

*Ceiling, other vertical walls: initial inside wall temp.=30C, initial outside wall temp.=30C

 

My Question!!!

Why is not the floor construction's inside temperaure 30C like other walls?

Why always same initial temperature(inside wall temp.=25C, outside wall temp.=20C) in floor construction with active layer?

Why not change?

    

Someone who knows something about this, please help..


Best regards,


Jungmin Seo

 

Building Services Engineering Laboratory
Sungkyunkwan University, Archtectural Engineering

Tel : +82-31-290-7579
C.P.: +82-10-3067-558


 





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120709/ecb1d532/attachment-0001.htm>