[TRNSYS-users] Type 60 in TRNSYS 16: parameter values for parameter 41 and 42 ???

Prof K Sommer klaus.sommer at fh-koeln.de
Sat Nov 24 02:41:56 PST 2012


Hi,

I try to simulate the buffer tank, details of that are attached, with type 60 in TRNSYS 16.
My questions to the parameters 41 and 42:
What exactly covers "Heat exchanger wall conductivity" and what would be the right input value for this parameter if there is only a single pipe hx without fins and without pipe-in-pipe solution?
And how does the model handle the 60 liter water volume inside the pipe hx from time step to time step if the DHW usage is every hour at the
beginning around 30 to 50 liter per min.?

Many thanks in advance.

-- 
Mit freundlichen Grüßen

Klaus Sommer
-------------------------------------------------------------
Prof. Dr.-Ing., Rehva Fellow

Stellvertreter des geschäftsführenden Direktors des TGA-Instituts,
zuständig für FORSCHUNG, ENTWICKLUNG und INTERNATIONALES

Fachhochschule Köln/Cologne University of Applied Sciences

Institut für Technische Gebäudeausrüstung/Institute of Building Services Engineering
Betzdorfer Str. 2  ,  D-50679 Köln /GERMANY

Tel.: +49 221 8275 2599 oder -2624
http://www.f09.fh-koeln.de/fakultaet/personen/profs/klaus.sommer/

-------------- next part --------------
A non-text attachment was scrubbed...
Name: type60.pdf
Type: application/pdf
Size: 846025 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121124/e62b0be9/attachment-0001.pdf>


More information about the TRNSYS-users mailing list