[TRNSYS-users] CPU-Usage while simulate

[Schranzhofer, Hermann]

Hi Sascha,

I don't know if this helps but if you start your Simulation in the command Shell (cmd) with the command "start" you can give a priority (see also "help start" in cmd). If you use High ist will speed up your simulation, but be aware that you cannot use your system until your simulation is finished.

Regards,
Hermann

Von meinem iPad gesendet

Am 29.10.2012 um 20:49 schrieb "Heinze" <heinze at ingweber.de<mailto:heinze at ingweber.de>>:

Dear Trnsys-Users,

i´ve seen that my CPU-Usage is just 50 % while running a simulation. Is there a possibility to let Trnsys use 100 % of CPU so that the simulation runs faster ?
Or does the CPU-Usage have no effect on the simulation speed ?


Best regards

Sascha Heinze

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu<mailto:TRNSYS-users at cae.wisc.edu>
https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121029/a76a23b2/attachment-0001.htm>