[TRNSYS-users] Temperature and %RH setpoint TRNBUILD

David BRADLEY d.bradley at tess-inc.com
Tue Sep 18 13:00:46 PDT 2012


Gary,
   Defining your setpoint as a SCHEDULE in TRNBuild simply allows you to 
set a value that depends upon the time of day. Defining your setpoint 
using an INPUT allows you a good bit more flexibility. You could define 
your equation as follows:

Tset_heat = 24*occ + 12*(1-occ)

occ would have to be defined in another equation or perhaps a Type14 
forcing function to have a value of 1 when the building is occupied and 
a 0 when it is not occupied.

Best,
  David



On 9/17/2012 10:29, KUM GARY wrote:
> Hi,
>
> I trying to calculate the cooling demand of my office building in 
> TRNBUILD and would like the cooling demand to response according to my 
> occupancy schedule(less cooling at night and more cooling at day). I 
> try to define the set temp at the cooling type by i not sure which one 
> should i use (schedule or input?) And also the equation behind it, 
> because when i enter like for instance _24degree(set temp) *occupancy 
> schedule+0_, i would get 0 degree when there is no occupancy.
>
> Appreciate your kind assistance on this
>
> Gary Kum
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120918/92a516c7/attachment-0001.htm>


More information about the TRNSYS-users mailing list