Hello together,
I'm trying to use the TESS NOSTAND type 343, but I'm getting an error
every time. As I cannot locate it's origin I'm hoping that anybody here
could help me.
The error text is:
Visual Fortran run-time error
forrtl:severe (29): file not found, unit 0, file
Image PC Routine Line Source
libifcoremd.dll 0209D3FE Unkown Unknown Unkown
Stack trace terminated abnormally
I attached my list file to this Mail.
Thank you for your help.
Best regards
Simon
-------------- next part --------------
TRNSYS - the TRaNsient SYstem Simulation program
The Solar Energy Lab at the University of Wisconsin - Madison, USA
Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France
Transsolar Energietechnik GmBH, Stuttgart, Germany
Thermal Energy System Specialists, LLC, Madison Wisconsin, USA
Release 17.00.0019
Listing file for: "C:\Trnsys17\MyProjects\DA\Test\343\343.dck"
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Trnsys17\Exe"
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 208
TRNSYS Message 75 : The Type referenced below requires descriptors instead of initial values.
Reported information : Type 208
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 535
TRNSYS Message 75 : The Type referenced below requires descriptors instead of initial values.
Reported information : Type 535
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 580
TRNSYS Message 76 : The following Type has been identified as allowing the unit specifications (kg/h for example) after the input specifications and intial values for the inputs. The critical parameter number, and the value of this critical parameter that indicates that the units will be supplied is also listed. This information was retrieved from the VarUnits.dat file loacted in the \Exe directory of your TRNSYS 16 installation.
Reported information : Type 580, Critical Parameter 11, Parameter Value 1
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : 580
TRNSYS Message 88 : The following Type has been identified as allowing FORMAT statements. This information was retrieved from the Formats.dat file loacted in the \Exe directory of your TRNSYS 16 installation.
Reported information : Type 580
*** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors.
*** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal errors found.
*** Evaluating the EQUATIONs and CONSTANTs to determine their initial values.
*** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin processing the remainder of the TRNSYS input file.
VERSION 17
*******************************************************************************
*** TRNSYS input file (deck) generated by TrnsysStudio
*** on Mittwoch, April 03, 2013 at 10:20
*** from TrnsysStudio project: C:\Trnsys17\MyProjects\DA\Test\343\343.tpf
***
*** If you edit this file, use the File/Import TRNSYS Input File function in
*** TrnsysStudio to update the project.
***
*** If you have problems, questions or suggestions please contact your local
*** TRNSYS distributor or mailto:software at cstb.fr
***
*******************************************************************************
*******************************************************************************
*** Units
*******************************************************************************
*******************************************************************************
*** Control cards
*******************************************************************************
* START, STOP and STEP
CONSTANTS 3
START=0
STOP=168
STEP=0.125
* User defined CONSTANTS
! Start time End time Time step
SIMULATION 0.0000000000000000E+00 1.6800000000000000E+02 1.2500000000000000E-01
! Integration Convergence
TOLERANCES 1.0000000000000002E-03 1.0000000000000002E-03
! Max iterations Max warnings Trace limit
LIMITS 30 500 51
! TRNSYS numerical integration solver method
DFQ 1
! TRNSYS output file width, number of characters
WIDTH 80
! NOLIST statement
LIST
! MAP statement
! Solver statement Minimum relaxation factor Maximum relaxation factor
SOLVER 0
1.000000000000000
1.000000000000000
! Nan DEBUG statement
NAN_CHECK 0
! Overwrite DEBUG statement
OVERWRITE_CHECK 0
! disable time report
TIME_REPORT 0
! EQUATION SOLVER statement
EQUATION SOLVING METHOD 0
* EQUATIONS "Equa"
*
EQUATIONS 2
!°C
T_SWS_V = 70
!kg/hr
m_SWS = 40000
*$UNIT_NAME Equa
*$LAYER Main
*$POSITION 277 127
*------------------------------------------------------------------------------
* Model "Type15-6" (Type 15)
*
UNIT 5 TYPE 15
*$UNIT_NAME Type15-6
*$MODEL .\Weather Data Reading and Processing\Standard Format\Meteonorm Files (TM2)\Type15-6.tmf
*$POSITION 115 298
*$LAYER Weather - Data Files #
PARAMETERS 9
! 1 File Type
! 2 Logical unit
! 3 Tilted Surface Radiation Mode
! 4 Ground reflectance - no snow
! 5 Ground reflectance - snow cover
! 6 Number of surfaces
! 7 Tracking mode
! 8 Slope of surface
! 9 Azimuth of surface
6.0000000000000000E+00 3.0000000000000000E+01 3.0000000000000000E+00 2.0000000000000001E-01 7.0000000000000007E-01
1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
*** External files
ASSIGN C:\Trnsys17\Weather\Meteonorm\Europe\DE-Hamburg-Fuhlsbuettel-101470.tm2 30
*|? Which file contains the Meteonorm weather data? |1000
*------------------------------------------------------------------------------
* Model "TYPE343" (Type 343)
*
UNIT 2 TYPE 343
*$UNIT_NAME TYPE343
*$MODEL .\Thermal Storage\Type343\TYPE343.tmf
*$POSITION 354 303
*$LAYER Main #
PARAMETERS 56
! 1 Upper diameter of storage bed
! 2 Lower diameter of storage bed
! 3 Thickness of nth (from top) storage layer-1
! 4 Thickness of nth (from top) storage layer-2
! 5 Thickness of nth (from top) storage layer-3
! 6 Thickness of nth (from top) storage layer-4
! 7 Thickness of nth (from top) storage layer-5
! 8 Thickness of nth (from top) storage layer-6
! 9 Thickness of nth (from top) storage layer-7
! 10 Thickness of nth (from top) storage layer-8
! 11 Thickness of nth (from top) storage layer-9
! 12 Thickness of nth (from top) storage layer-10
! 13 Depth of top of storage bed below ground suface
! 14 Thickness of thermal insulation on top of the storage bed
! 15 Volumetric thermal heat capacity of storage material
! 16 Heat conductivity of storage material
! 17 Cavity portion of storage material (water volume/total volume, with water storage= 1)
! 18 Permeability of storage material
! 19 Heat transfer coefficient at storage bed side wall
! 20 Heat transfer coefficient at storage bed bottom
! 21 Volumetric heat capacity of thermal insulation at top of storage bed
! 22 Heat conductivity of the thermal insulation at storage cover
! 23 Volumetric thermal capacity of local soil
! 24 Heat conductivity of local soil
! 25 Heat transmission coefficient of ground surface
! 26 Absorption factor of ground surface
! 27 Specific thermal capacity of fluid in heat exchanger pipe coils
! 28 Heat conductivity of frozen storage material (ice or gravel/ice)
! 29 Outside diameter of heat exchanger pipe coils
! 30 internal diameter of the heat exchanger pipe coils
! 31 internal heat transmission coefficient of heat exchanger pipe coils
! 32 Heat conductivity of pipe coil
! 33 Length of nth heat exchanger pipe coil-1
! 34 Length of nth heat exchanger pipe coil-2
! 35 Length of nth heat exchanger pipe coil-3
! 36 Length of nth heat exchanger pipe coil-4
! 37 Length of nth heat exchanger pipe coil-5
! 38 Length of nth heat exchanger pipe coil-6
! 39 Length of nth heat exchanger pipe coil-7
! 40 Length of nth heat exchanger pipe coil-8
! 41 Length of nth heat exchanger pipe coil-9
! 42 Length of nth heat exchanger pipe coil-10
! 43 Initial volumetric ice portion of nth storage layer-1
! 44 Initial volumetric ice portion of nth storage layer-2
! 45 Initial volumetric ice portion of nth storage layer-3
! 46 Initial volumetric ice portion of nth storage layer-4
! 47 Initial volumetric ice portion of nth storage layer-5
! 48 Initial volumetric ice portion of nth storage layer-6
! 49 Initial volumetric ice portion of nth storage layer-7
! 50 Initial volumetric ice portion of nth storage layer-8
! 51 Initial volumetric ice portion of nth storage layer-9
! 52 Initial volumetric ice portion of nth storage layer-10
! 53 Initial subsoil temperature, given a homogeneous temperature distribution at program start
! 54 Subsoil temperature at outside edge of the simulated area
! 55 Option for frequency of output of temperature distribution in the soil
! 56 Number of the output unit for file with subsoil temperatures
2.9500000000000000E+01 2.9500000000000000E+01 8.8000000000000000E-01 8.8000000000000000E-01 8.8000000000000000E-01
8.8000000000000000E-01 8.8000000000000000E-01 8.8000000000000000E-01 8.8000000000000000E-01 8.8000000000000000E-01
8.8000000000000000E-01 8.8000000000000000E-01 1.2000000000000000E+00 9.0000000000000002E-01 4.1930001990000010E+03
2.0951999999999997E+00 1.0000000000000000E+00 0.0000000000000000E+00 6.1610000000000009E-01 6.7552900000000016E-01
7.5174000000000001E+02 1.7496000000000003E-01 3.7536000000000000E+00 2.1240000000000001E+00 0.0000000000000000E+00
5.0000000000000000E-01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 1.2000000000000000E+01 1.2000000000000000E+01 0.0000000000000000E+00
0.0000000000000000E+00
INPUTS 28
! [unconnected] Inlet temperature of pipe system cycle 1
! [unconnected] Mass flow of pipe system cycle 1
! [unconnected] Inlet temperature of pipe csystem cycle 2
! [unconnected] Mass flow of pipe system cycle 2
! Equa:T_SWS_V ->Inlet temperature of direct water heat exchange system
! Equa:m_SWS ->Mass flow, direct water heat exchange system
! Type15-6:Dry bulb temperature ->Ambient temperature
! Type15-6:Total horizontal radiation ->Global irradiance on horizontal surface
! [unconnected] Valve position for coupling of the tubing queue N at coil of pipe circle 1-1
! [unconnected] Valve position for coupling of the tubing queue N at coil of pipe circle 1-2
! [unconnected] Valve position for coupling of the tubing queue N at coil of pipe circle 1-3
! [unconnected] Valve position for coupling of the tubing queue N at coil of pipe circle 1-4
! [unconnected] Valve position for coupling of the tubing queue N at coil of pipe circle 1-5
! [unconnected] Valve position for coupling of the tubing queue N at coil of pipe circle 1-6
! [unconnected] Valve position for coupling of the tubing queue N at coil of pipe circle 1-7
! [unconnected] Valve position for coupling of the tubing queue N at coil of pipe circle 1-8
! [unconnected] Valve position for coupling of the tubing queue N at coil of pipe circle 1-9
! [unconnected] Valve position for coupling of the tubing queue N at coil of pipe circle 1-10
! [unconnected] Valve position for coupling of the tubing queue 1 at coil of pipe circle 2-1
! [unconnected] Valve position for coupling of the tubing queue 1 at coil of pipe circle 2-2
! [unconnected] Valve position for coupling of the tubing queue 1 at coil of pipe circle 2-3
! [unconnected] Valve position for coupling of the tubing queue 1 at coil of pipe circle 2-4
! [unconnected] Valve position for coupling of the tubing queue 1 at coil of pipe circle 2-5
! [unconnected] Valve position for coupling of the tubing queue 1 at coil of pipe circle 2-6
! [unconnected] Valve position for coupling of the tubing queue 1 at coil of pipe circle 2-7
! [unconnected] Valve position for coupling of the tubing queue 1 at coil of pipe circle 2-8
! [unconnected] Valve position for coupling of the tubing queue 1 at coil of pipe circle 2-9
! [unconnected] Valve position for coupling of the tubing queue 1 at coil of pipe circle 2-10
CONST CONST CONST CONST T_SWS_V
M_SWS 5,1 5,18 CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
DERIVATIVES 10
! 1 Temperature of the nth. Storage layer-1
! 2 Temperature of the nth. Storage layer-2
! 3 Temperature of the nth. Storage layer-3
! 4 Temperature of the nth. Storage layer-4
! 5 Temperature of the nth. Storage layer-5
! 6 Temperature of the nth. Storage layer-6
! 7 Temperature of the nth. Storage layer-7
! 8 Temperature of the nth. Storage layer-8
! 9 Temperature of the nth. Storage layer-9
! 10 Temperature of the nth. Storage layer-10
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type65d" (Type 65)
*
UNIT 4 TYPE 65
*$UNIT_NAME Type65d
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 444 127
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+03 0.0000000000000000E+00
1.0000000000000000E+03 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 2
! TYPE343:Outlet temperature direct water out exchange system ->Left axis variable-1
! TYPE343:middle storage temperature ->Left axis variable-2
2,5 2,15
*** INITIAL INPUT VALUES
T_SWS_R T_SWS_m
LABELS 3
Temperatures
Heat transfer rates
T_SWS_R und T_SWS_m
*------------------------------------------------------------------------------
* Model "T_SWSSchichten" (Type 65)
*
UNIT 6 TYPE 65
*$UNIT_NAME T_SWSSchichten
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 512 212
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical unit for output file
! 11 Output file units
! 12 Output file delimiter
1.0000000000000000E+01 2.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+02 0.0000000000000000E+00
3.0000000000000000E+03 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 12
! TYPE343:Temperature nth storage layer-1 ->Left axis variable-1
! TYPE343:Temperature nth storage layer-2 ->Left axis variable-2
! TYPE343:Temperature nth storage layer-3 ->Left axis variable-3
! TYPE343:Temperature nth storage layer-4 ->Left axis variable-4
! TYPE343:Temperature nth storage layer-5 ->Left axis variable-5
! TYPE343:Temperature nth storage layer-6 ->Left axis variable-6
! TYPE343:Temperature nth storage layer-7 ->Left axis variable-7
! TYPE343:Temperature nth storage layer-8 ->Left axis variable-8
! TYPE343:Temperature nth storage layer-9 ->Left axis variable-9
! TYPE343:Temperature nth storage layer-10 ->Left axis variable-10
! TYPE343:Calorific loss stream entirely ->Right axis variable-1
! TYPE343:internal energy in the storage ->Right axis variable-2
2,16 2,17 2,18 2,19 2,20
2,21 2,22 2,23 2,24 2,25
2,10 2,11
*** INITIAL INPUT VALUES
T_SWS_o T_SWS_2 T_SWS_3 T_SWS _4 T_SWS_5
T_SWS_6 T_SWS_7 T_SWS_8 T_SWS _9 T_SWS_u
Q_SWS_loss E_SWS
LABELS 3
Temperatures
Heat transfer rates
Schichtentemperaturen und Q
*------------------------------------------------------------------------------
END
TRANSIENT SIMULATION STARTING AT TIME = 0.0000000000000000E+00
STOPPING AT TIME = 1.6800000000000000E+02
TIMESTEP = 1 / 8
DIFFERENTIAL EQUATION ERROR TOLERANCE = 1.0000000000000002E-03
ALGEBRAIC CONVERGENCE TOLERANCE = 1.0000000000000002E-03
DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 90 : TRNDll.dll is compiled in release mode. External DLLs will be loaded from the .\UserLib\ReleaseDLLs\ directory.
Reported information : Not available
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from TRNDll.dll: Type65, Type15
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "FileReader.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSApplicationsLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSArchiveDLL_v2.04_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSCogenLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSControllersLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSElectricalLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGHPLibraryType997_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGHPLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGroundCouplingLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGroundCouplingType1244_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGroundCouplingType1255_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGroundCouplingType1256_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGroundCouplingType957_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGroundCouplingType993_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSHTSLibraryType263_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSHTSLibrary_v17.01_Release.dll.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSHVACLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSHydronicsLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSLoadsStructuresLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSOptimizationLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSSolarLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSStorageLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSUtilityLibrary_v17.01_Release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type127.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type157_demo_release.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type340.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from "type343.dll": Type343
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type76Lib.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type79-W.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type79Lib.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type82Lib.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 199 : TRNSYS found at least one user DLL in the UserLib directory. (Note: Only DLL's including Types that are used in the simulation are loaded)
Reported information : 1 user DLL was loaded after searching in "C:\Trnsys17\UserLib\ReleaseDLLs"