[TRNSYS-users] How to call all inputs at the same time in MATLAB?

[Ivan Flores Abascal]

Dear Reza:

 

If the inputs from TRNSYS are independent of the outputs from MATLAB, one
solution could be this one:

Run the case in TRNSYS and export the results (e.g. T_ambient) to a xls
file. 

Load the data with MATLAB and make the mathematical process. 

Write the results  from Matlab in another xls file. 

 

If you need to postprocess these data in TRNSYS, you can read them from the
xls file and run again the project.

 

Sure there is a better way to do it, but this manner is quite simple and
fast, and you do not need to change your case a lot.

 

Best regards

 


Ivan Flores Abascal
Lecturer of heat transfer
ivan.flores at ehu.es
94 601 8214



MAKINA ETA MOTOR TERMIKOAK SAILA/DEPARTAMENTO DE MÁQUINAS Y MOTORES TÉRMICOS


INGENIARITZA GOI ESKOLA TEKNIKOA/ESCUELA TÉCNICA SUPERIOR DE INGENIERÍA

Alameda Urkijo s/n| 48013 BILBAO
T.: +34 946014028| 

F.: +34 946014283
 <http://www.ehu.es/> www.ehu.es 

Descripción:
http://www.unibertsitate-hedakuntza.ehu.es/p268-content/es/contenidos/inform
acion/manual_id_corp/es_manual/images/firma_email_upv_euskampus_bilingue.gif

 

 

De: Safizadeh Mohammadreza [mailto:m.safizadeh at nus.edu.sg] 
Enviado el: jueves, 04 de abril de 2013 5:56
Para: trnsys-users at cae.wisc.edu
Asunto: [TRNSYS-users] How to call all inputs at the same time in MATLAB?

 

Dear all TRNSYS users and Happy Spring;

If I use Matlab code alone, I can load my whole data e.g T_ambient (every
second) as my input data (6000) using "Load" command; and since I use some
partial difference equations, I interpolate these 6000 data base on very
small time step (dt=0.01 second). Thereafter, Matlab processes these 600,000
data in “for loop” and produces the outputs at the end of “for loop”.

My problems is that: If I link Matlab and TRNSYS together: 

base on my initial understanding from Trnsys’s example, Trnsys call Only
“one data” in each time step and process that only input to produce only one
output. I want Trnsys to call all my data (6000) (like load command in
Matlab) and pass these 6000 data to Matlab, and get 6000 output data from
Matlab after mathematical process. Exactly like the command "Load" in Matlab
to call my all inputs.

 

I am looking your favorable email very soon :)

Sincerely Yours

Reza Safi ;

 

PhD Condidate :: NGS - NUS Graduate School for Integrative Sciences and
Engineering :: National University of Singapore,
<mailto:m.safizadeh at nus.edu.sg> m.safizadeh at nus.edu.sg (E) ::
<https://sites.google.com/site/safizadehedu/>
https://sites.google.com/site/safizadehedu/ (w)

Important: This email is confidential and may be privileged. If you are not
the intended recipient, please delete it and notify us immediately; you
should not copy or use it for any purpose, nor disclose its contents to any
other person. Thank you.

 P Let's Go Green... Please think before you print!

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130404/6f37d191/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 6359 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130404/6f37d191/attachment-0001.gif>