[TRNSYS-users] Gererate .dll from a Trnsys Simulation

[mcdowell at tess-inc.com]

Sarah -

It sounds like you are trying a cosimulation approach like using 
Functional Mock-up Units.  As far as I know this has not yet been done 
with TRNSYS and you will need to work through the process yourself.  In 
the interim you may want to look at the Building Control Virtual Test 
Bed (BCVTB) from LBNL in the US.

Regards,

Tim

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
608-274-2577

On 2013-04-03 06:32, sarah.settler at mailbox.tu-berlin.de wrote:
> Hello,
>
> at the Hamburg University of Applied Sciences we are building up a
> multi-agent-simulation.
> In this simulation we want to use Trnsys, Matlab, modelica models.
> For  this we need to find a possibility how we can export a whole
> simulation to a single .dll file. (Like it is possible for Matlab and
> Dymola/Modelica) Is there any additional software like TRNSED able to
> export to a .dll? Or is there any other possibility to realize this?
>
> Thank you very much,
>
> Sarah
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users