[TRNSYS-users] Imposing a load on a system

[Amdi Worm]

Dear all

I am using a type9a in combination with type 682 to impose the heating load
of a building on a heatpump-system.
I am simulating with a timestep of 0.1 hr, but the loadfile i´m using has
only 8760 values (1 pr. hour). Running the simulation it seems that every
0.1 hour is loaded by the hourly value from the loadfile in type 9a, but I
would like the loadfile to spread the hourly load equally into 0.1 hr time
steps. Is that easy to do automaticly by Trnsys or do i have to create a
new loadfile with 87600 values instead of 8760 values?

Hope you can help.

Best regards
Amdi Worm

Esbensen A/S
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130123/5335d7d6/attachment-0001.htm>