[TRNSYS-users] Removing Weather data from a 3D building project

[Muhammad Tauha Ali]

You can create your own weather file in excel and convert to epw format or tmy2 format as desired. See below for details:
https://mailman.cae.wisc.edu/pipermail/trnsys-users/2012/009662.html

there may be other utilities also to do above task but you have to search then.

Tauha
From: trnsys-users-bounces at cae.wisc.edu [mailto:trnsys-users-bounces at cae.wisc.edu] On Behalf Of Arnaud Candaele
Sent: Thursday, March 14, 2013 1:14 PM
To: trnsys-users at cae.wisc.edu
Subject: [TRNSYS-users] Removing Weather data from a 3D building project

Hi,

I'm new to TRNSYS, and I'd like to create steady weather conditions to test a building.
I created a building using Google Sktechup, then started a new "3d building project". Now, I'd like to force steady oustide conditions, so that I can make a first analyze of my building.
My question is : how can I do that ? It seems that the building model impose that I use a weather file. So I see 2 options : 1) I create a "steady" weather file that I then use in my project, but this doesn't seem that easy to do (or does such a weather file already exist ? I didn't find one..), or 2) I try to modify my project so that my building receives steady conditions instead of time varying conditions from the weather file. I tried to do that, and I could almost do it. I used "equations" modules to impose constant conditions for TAMB, TGROUND, and so on.. it works. But then, when I monitor the temperature in a room, it is not completely flat. I don't understand why, because there is no gain/heating in any room, and all inputs to the building are constant, except for "AZEN" which is related to solar position. This parameter, I can't impose constant because TRNSYS tells me it HAS to be connected to the weather file.. So, that's the only thing actually varying, so I guess this is the reason why I don't get steady temperature in my monitored room.

In other words : how can I "disconnect" solar calculations from my project ?
Or even a more generic question : how can I impose steady outside conditions on my building, knowing that I created my project from a 3D building from Google Sketchup... ?
I mean, it seems to me like a quite simple problem, but the solution seems quite complicated...

Thank you for your help,

Arnaud.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130314/9990b348/attachment-0001.htm>