[TRNSYS-users] (no subject)

David BRADLEY d.bradley at tess-inc.com
Tue Nov 26 09:15:38 PST 2013


Ali,
   I would highly recommend that you use Type56 and its interfaces 
Trnsys3D and TrnBuild in order to define your building. Type19 is not a 
very easy component with which to work. If you must use Type19 then I 
would recommend that you start by running the Type19 example 
(..\Trnsys17\Examples\Detailed Single Zone\Detailed single zone.tpf) and 
then begin to modify the example to suit your needs instead of starting 
from scratch.
Kind regards,
  David


On 11/25/2013 03:32, ali javed wrote:
> dear all
>
> i hope all of you will be fine. I have a problem i have calculated the 
> cooling load of an office room manually now i want to use type 19 for 
> the calculation of cooling load how i can put the specifications of 
> the office building in this type.
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131126/28bbdfb1/attachment-0001.htm>


More information about the TRNSYS-users mailing list