[TRNSYS-users] Type 927 and type 4a

Jeff Thornton thornton at tess-inc.com
Mon Apr 28 11:31:19 PDT 2014


 

Use an aquastat model from the TESS Libraries, or a differential
controller from the standard library, to generate an on/off signal for
the heat pump. 

Jeff 

---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 04/28/2014 5:57 am, Alain Pascal Goumba wrote: 

> Hi, 
> I work on optimization of heat pump. I use type 927 as heat pump and for tank, type4a. But i have a problem of function conditions. I don't know how i indicate my heat pump works if temperature in my tank < 65°C and stop when temperature of tank > or = 65°C. 
> Don't forget my load and source températures. 
> 
> Thank you! 
> 
> P.S: My English is not very good! If you can give me your answer in french, it's excellent but if in English, it's ok. 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users [1]
 

Links:
------
[1] https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140428/e524e2ee/attachment-0001.htm>


More information about the TRNSYS-users mailing list