[TRNSYS-users] IF statemenet

Fassnacht, Tillman (IEB) tillman.fassnacht at kit.edu
Thu Feb 13 05:31:01 PST 2014


Hello Metkel,

you have to utilize the greater than and less than function GT/LT in the right way.

GT(Tamb,18)+LT(Tamb,14)*2

è 0 no mode

è 1 cooling mode

è 2 heating mode

Mit freundlichen Grüßen / Kind Regards,

Tillman Faßnacht

Telefon: 0721 608 43769

Von: trnsys-users-bounces at cae.wisc.edu [mailto:trnsys-users-bounces at cae.wisc.edu] Im Auftrag von metkell yebiyo
Gesendet: Donnerstag, 13. Februar 2014 14:19
An: trnsys-users at cae.wisc.edu
Betreff: [TRNSYS-users] IF statemenet

Dear TRNSYS users,

Could you anyone tell me if it is possible to write an if statement in the equation box,
I am trying to send a control signal based on the outside temperature, if outside air temperature is
greater than 18 deg C then the heat pump would run in cooling mode else if the outside air temperature is less than 14 deg C then  the heat pump would run in heating mode.

Any suggestions would be appreciated thank you very much.


Regards,
Metkel

Metkel Yebiyo BEng (Hons), MSc
CEREB PhD Researcher - Ground Source Heat Pumps
Room T615
Department of Urban Engineering
Faculty of Engineering, Science and the Built Environment
London South Bank University,
103 Borough Road,
London SE1 0AA
Tel: +44 (0)20 7815 7639
E: yebiyom at lsbu.ac.uk<mailto:yebiyom at lsbu.ac.uk>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140213/be4f0c67/attachment-0001.htm>


More information about the TRNSYS-users mailing list