[TRNSYS-users] heat pipe

[mohameed alsamareey]

sorry 

calculate temperature of fluid flow  after and before heat pipe condenser

On , mohameed alsamareey <muham76 at yahoo.com> wrote:
 


i mean calculate temperature after and before manifold as a file that it is enclosed with this message 

On , mohameed alsamareey <muham76 at yahoo.com> wrote:
 


Hi Jeff
i would like to calculate the temperature water at manifold (at location the heat pipe condenser putted in manifold )


Hi  
On Monday, May 19, 2014 12:07 PM, Jeff Thornton <thornton at tess-inc.com> wrote:
 


It depends on how you'd like to model the collector.  If the collector has been tested to one of the common standards (EN12975-2 for example), then it can be readily modeled in TRNSYS.  If you are looking for a detailed physics-based first principles model of a concentrating heat pipe collector, I am not aware of one.
 
Jeff
 
---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577  Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com 
On 05/19/2014 11:09 am, mohameed alsamareey wrote:
Dear for all
>I would like to know , is TRNSYS solve parabolic trough solar collector with heat pipe?
>i mean that the heat pipe is consist two part (evaporator+condenser), theromsyphon occurs in the heat pipe
>the heat pipe places in the focal line of the parabolic 
>Many Thanks
>Mohammed
> 
>
>_______________________________________________
TRNSYS-users mailing list TRNSYS-users at cae.wisc.edu https://mailman.cae.wisc.edu/listinfo/trnsys-users 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140519/bb4a3033/attachment-0001.htm>