[TRNSYS-users] (no subject)
Jeff Thornton
thornton at tess-inc.com
Thu Nov 20 10:13:53 PST 2014
Haydar Kepekci,
It shows a remarkable lack of class, and a remarkable lack of
intelligence, to F-bomb a mailing list when links that describe how to
unsubscribe from the list are provided on every e-mail that goes
out.....
---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com
On 11/20/2014 11:57 am, mcdowell at tess-inc.com wrote:
> Haydar Kepekci -
>
> Please use the links at the bottom of the email to unsubscribe from the TRNSYS mailing list.
>
> And please avoid using offensive language in email messages.
>
> Regards,
>
> Tim
>
> ---
> Timothy P. McDowell
> Executive Vice President
> Thermal Energy System Specialists, LLC
> 22 N Carroll St, Suite 370
> Madison, WI 53703
> 608-274-2577
>
> On 2014-11-20 09:23, haydar kepekçi wrote:
>
> Dont send me e- mail !! I dont want to see ur words about Fucking trnsys !!!
>
> Sent using CloudMagic [2]
>
> On Per, Kas 20, 2014 at 4:32 PM, Ben Heymer <bheymer at gmail.com> wrote:
>
> You should look through your "Result" file for the source of the error.
>
> A common cause of errors of this type is convergence. Make sure you
> have enough volume in your water loop for at least 1 timestep of water
> flow. Sometimes it's also helpful to connect the mass flow output of
> the pump right back to the mass flow input.
>
> As a last resort, you can relax the convergence parameters and error
> thresholds in the control cards.
>
> Ben Heymer, PE
>
> On Thu, Nov 20, 2014 at 3:52 AM, Michael Stochniol
> <stochnio at mail.hs-ulm.de> wrote:
>> Hallo everyone,
>>
>> im trying to create a control function using equations with logic operators for the control of a variable speed pump, in order to adjust the massflow trough the pump. I wrote a control funktion and plotted it without connecting it to the pump and it seemed to work right. But if i am conecting it to the pump my simulation freezes after around 700 timesteps or less. I am trying to create solar domestic hot water system. The question is, is it possible to create this kind of control circuit with equations ? I have similar problems with every control loop i am trying to create this way. The math should work but implemented in TRNSYS (TRNSYS 17) the simulation stick somewhere.
>>
>> I am no experienced user so maybe someone could give my some advise how to implement this kind of control functions right?
>>
>> i am very grateful for any help or ideas.
>>
>> thanks in advance
>>
>> Michael Stochniol
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
[1]
Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
[2] https://cloudmagic.com/k/d/mailapp?ct=pa&cv=5.1.6.5&pv=4.3
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20141120/3e61f047/attachment-0002.htm>
More information about the TRNSYS-users
mailing list