[TRNSYS-users] Electrolyser with fuel cell

[David BRADLEY]

Sascha,
   I would recommend that you look at the Stand-Alone Power System.tpf 
example as a starting point. If I remember correctly, the input "fuel 
cell current" is a bit like a set point; it is the amount of current 
that is required to be provided by the fuel cell in order to meet the load.
Best,
  David

On 9/2/2014 08:50, Lindig Sascha wrote:
>
> Hello,
>
> I am trying to build an island system consisting of PV, battery, 
> electrolyser and fuel cell.
>
> The input of the fuel cell really puzzle me. Can you please explain 
> from what the input IFC (Total electrical current provided by FC 
> unit.) is?
>
> And which current should I put in there.
>
> Even syntactically I don't understand how current PROVIDED BY the FC 
> can be an input.
>
> Thanks you very much for the answer.
>
> Best regards,
>
> Sascha
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140902/805fd53b/attachment-0002.htm>