[TRNSYS-users] FW: FW: FW: want to design an array of hybrid pv panels or combination of hybrid pv panels and transparant pv panels
Stefan Kranz
kranz at gfz-potsdam.de
Tue Aug 11 05:05:31 PDT 2015
Benjamin,
there is a link in the 534 user interface (down left). Actually the
plug-in should work.
Regards,
Stefan
Am 11.08.2015 um 03:57 schrieb Benjamin Stobbe:
>
> Dear Tim,
>
> Which plugin?
>
> Regards,
>
> Benjamin
>
> *Van:*TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org]
> *Namens *mcdowell at tess-inc.com
> *Verzonden:* dinsdag 11 augustus 2015 5:18
> *Aan:* TRNSYS users mailing list at OneBuilding.org
> <trnsys-users at lists.onebuilding.org>
> *Onderwerp:* Re: [TRNSYS-users] FW: FW: FW: want to design an array of
> hybrid pv panels or combination of hybrid pv panels and transparant pv
> panels
>
> Benjamin Stobbe -
>
> You need to modify the parameters of Type 534 by using the plug-in.
>
> Regards,
>
> Tim
>
> ---
> Timothy P. McDowell
> Executive Vice President
> Thermal Energy System Specialists, LLC
> 22 N Carroll St, Suite 370
> Madison, WI 53703
> 608-274-2577
>
> On 2015-08-09 21:27, Benjamin Stobbe wrote:
>
> Dear people,
>
> I look into the Type 534 storage tank and yes I can choice more
> inlets so I connected four solar panels to the water tank via
> pumps but I can not get it working I get an error that a parameter
> is not behaving how it should but it is referring to a parameter
> which does not exist or is an output parameter. So I don’t
> understand. It is a very basic model right now. I have no heat
> exchangers now. The flow and the temp of all the port are now only
> connected.
>
> Best regards,
>
> Benjamin Stobbe
>
> *Van:*David BRADLEY [mailto:d.bradley at tess-inc.com]
> *Verzonden:* donderdag 23 juli 2015 22:56
> *Aan:* TRNSYS users mailing list at OneBuilding.org
> <trnsys-users at lists.onebuilding.org
> <mailto:trnsys-users at lists.onebuilding.org>>;
> benjamin_stobbe at hotmail.com <mailto:benjamin_stobbe at hotmail.com>
> *Onderwerp:* Re: [TRNSYS-users] FW: FW: want to design an array of
> hybrid pv panels or combination of hybrid pv panels and
> transparant pv panels
>
> Benjamin,
> If you have access to the TESS Storage Library then you can use
> Type534, which can have quite a few inlets and outlets. If you are
> using only the standard component library then you will need to
> use some instances of Type11 to mix all the returns from your
> solar collectors before they go into the tank. You will also need
> to then use some instances of Type11 at the outlet of the tank to
> split the mixed flow so that it goes back to the appropriate
> collector.
> kind regards,
> David
>
> On 07/23/2015 00:30, benjamin stobbe wrote:
>
> Sorry to be more clear i am talking about a Stratified Storage
> Tank, because i saw by some other tanks there is the option
> for 2 inlets i want 4 inlets if possible from every facade, if
> you use water from other solar panels the water is warmer and
> less heat exchange and less cooling for the solar panels so
> this option is not feasable.
>
> Best regards,
>
> Benjamin
>
> ------------------------------------------------------------------------
>
> From: benjamin_stobbe at hotmail.com
> <mailto:benjamin_stobbe at hotmail.com>
> To: trnsys-users at lists.onebuilding.org
> <mailto:trnsys-users at lists.onebuilding.org>
> Date: Thu, 23 Jul 2015 06:57:02 +0200
> Subject: [TRNSYS-users] FW: want to design an array of hybrid
> pv panels or combination of hybrid pv panels and transparant
> pv panels
>
> Dear everyone,
>
> I had a followup on this question. I have that building and a
> building has four different facades with four different
> direction but if i want to model this with one tank is this
> possible. So a tank with more inputs or must i then connect
> the solar panels with eachother and then to the tank.
>
> Best regards,
>
> Benjamin Stobbe
>
> ------------------------------------------------------------------------
>
> From: benjamin_stobbe at hotmail.com
> <mailto:benjamin_stobbe at hotmail.com>
> To: trnsys-users at lists.onebuilding.org
> <mailto:trnsys-users at lists.onebuilding.org>
> Date: Wed, 22 Jul 2015 10:37:28 +0800
> Subject: [TRNSYS-users] want to design an array of hybrid pv
> panels or combination of hybrid pv panels and transparant pv
> panels
>
> Dear people,
>
> I am busy with designing a solar system on a facade of a
> building and i want this to be a combination of transparent
> solar cells and hybrid pv panels. Now the last weeks I already
> figured the hybrid pv(PV-t) panels and I thought about how can
> I do an array. There is a possible to do an array of pv-panels
> but this is not hybrid and I thought I can make the surface of
> the hybrid pv panel bigger but this also is not what you want
> because then you also have to increase the amount of pipes and
> this does not seem to work that good. For the problem
> transparent pv panels I can just use array of solar panels and
> make the yield times the factor of transparent or make the
> panels smaller.
>
> But I hope someone can help me with the hybrid pv-t panels.
>
> Best regards,
>
> Benjamin Stobbe
>
>
> _______________________________________________ TRNSYS-users
> mailing list TRNSYS-users at lists.onebuilding.org
> <mailto:TRNSYS-users at lists.onebuilding.org>
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
> _______________________________________________ TRNSYS-users
> mailing list TRNSYS-users at lists.onebuilding.org
> <mailto:TRNSYS-users at lists.onebuilding.org>
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> _______________________________________________ TRNSYS-users
> mailing list TRNSYS-users at lists.onebuilding.org
> <mailto:TRNSYS-users at lists.onebuilding.org>
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
>
>
> _______________________________________________
>
> TRNSYS-users mailing list
>
> TRNSYS-users at lists.onebuilding.org <mailto:TRNSYS-users at lists.onebuilding.org>
>
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> --
>
> ***************************
>
> David BRADLEY
>
> Principal
>
> Thermal Energy Systems Specialists, LLC
>
> 22 North Carroll Street - suite 370
>
> Madison, WI 53703 USA
>
>
>
> P:+1.608.274.2577
>
> F:+1.608.278.1475
>
> d.bradley at tess-inc.com <mailto:d.bradley at tess-inc.com>
>
>
>
> http://www.tess-inc.com
>
> http://www.trnsys.com
>
> _______________________________________________
>
> TRNSYS-users mailing list
>
> TRNSYS-users at lists.onebuilding.org <mailto:TRNSYS-users at lists.onebuilding.org>
>
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
--
Stefan Kranz
Sektion 4.1 Reservoirtechnologien
International Centre for Geothermal Research (ICGR)
Tel.: +49 (0)331/288-1565
Fax: +49 (0)331/288-1577
Email: stefan.kranz at gfz-potsdam.de
http://www.gfz-potsdam.de/geothermie
___________________________________
Helmholtz-Zentrum Potsdam
Deutsches GeoForschungsZentrum - GFZ
Stiftung des öffentlichen Rechts
Telegrafenberg, D-14473 Potsdam
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150811/10f82f00/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: jibjdjie.png
Type: image/png
Size: 127961 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150811/10f82f00/attachment-0001.png>
More information about the TRNSYS-users
mailing list